4 open source boards using the APX811-31UG-7
Real designs built with the APX811-31UG-7, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
PS2 AIO Mainboard
tschicki
121 × 83 mm568 parts6LMIT202AVR/Arduino
EtherDue
freetronics
101.6 × 53.3 mm153 partsNo license11AVR/Arduino
MEP MAXI 85V-1 REV 2 Interface Board
JGilcreast
221.5 × 130.8 mm323 parts4LNo license0RP2040/RP2350
PCBA
kalliod
93.5 × 72.5 mm132 parts4LGPL-3.00
The APX811-31UG-7 in open source designs
The gallery holds 4 open source boards using the APX811-31UG-7 from 4 GitHub repositories; a typical one measures about 111.3 × 77.8 mm and carries around 238 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is PS2 AIO Mainboard by tschicki.
Parts used alongside the APX811-31UG-7
Microcontrollers on boards using the APX811-31UG-7
What boards using the APX811-31UG-7 are built for
APX811-31UG-7: common questions
Where can I find a APX811-31UG-7 reference design?
Each of the 4 boards on this page is a real design using the APX811-31UG-7. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the APX811-31UG-7 use?
Most are built on AVR/Arduino (2) and RP2040/RP2350 (2).
How big is a typical board using the APX811-31UG-7?
The median is 111.3 × 77.8 mm, and 0% are two-layer designs.
What is the most popular open source board using the APX811-31UG-7?
By GitHub stars, PS2 AIO Mainboard by tschicki, with 202 stars.
Can I simulate one of these boards using the APX811-31UG-7 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.