3DPrinter Matrix Display

FREILab·3DPrinter_Matrix_Display·Hardware/RGB_board/RGB_board.kicad_pcb

3DPrinter Matrix Display PCB layout, top view — open source board by FREILab

About the 3DPrinter Matrix Display PCB

3DPrinter Matrix Display is an open source PCB design by FREILab, published on GitHub. It is a 2-layer board measuring 63.5 × 44.5 mm, with 24 components from 14 distinct parts.

Other key parts include the TPS563200. By type, the board carries 8 resistors, 5 capacitors, 3 ICs, 3 transistors, 3 connectors and 1 diode.

It belongs with the displays & leds and dev boards & breakouts designs in this gallery.

From the project

Matrix Display to display remaining Print Time (Octoprint)

This is a hardware / software project to display the remianing print time for the FREILab printers

The were some issues with the Octoprint API which locked up the MCU when a print job was started/finished. Instead of fixing the API itself, a simple watchdog was implemented to restart the Adafruit MatrixPortal S3 when the software freezes.

3DPrinter Matrix Display, from the project README
From the project README

Main components on the 3DPrinter Matrix Display

3DPrinter Matrix Display bill of materials (BOM)

24 components, 14 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS563200
U1
1
—
U$25
1
—
U$26
3
SI1308EDL-T1-BE3
Si1308EDL
Vishay Siliconix
Q1, Q2, Q3
1
CONN_01X11
Conn_01x11
J1
2
CONN_01X04
Conn_01x04
J2, J3
1
CDBC540-G
D1
1
3.3uH, 6A
L1
2
10UF
10uF
C1, C2
1
100NF
100nF
C3
2
22UF
22uF
C4, C5
3
100R
R1, R3, R5
4
10K
10k
R2, R4, R6, R8
1
56K2
56k2
R7

3DPrinter Matrix Display design files

The KiCad project lives in the FREILab/3DPrinter_Matrix_Display repository on GitHub; these links point at the commit this page was built from.

3DPrinter Matrix Display: common questions

How big is the 3DPrinter Matrix Display PCB?

The 3DPrinter Matrix Display measures 63.5 × 44.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the 3DPrinter Matrix Display?

24 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the 3DPrinter Matrix Display design files?

From the FREILab/3DPrinter_Matrix_Display repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the 3DPrinter Matrix Display design in my own project?

The repository has no license, so all rights stay with FREILab. Use it as a reference, and ask the author before reusing the design.

Similar boards