24 open source boards using the TPS563200

Real designs built with the TPS563200, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the TPS563200

Read from the KiCad layouts of 23 open source designs, one per repository: what each pin of the TPS563200 connects to, and the resistors, capacitors and other passives placed on it.

  • The SW pin has a series capacitor on 22 of 23 designs, most often 100 nF.
  • The SW pin has a inductor on 22 of 23 designs, most often 3.3 µH (then 2.2 µH).
  • The VFB pin has a resistor to GND on 22 of 23 designs, most often 10 kΩ (then 3 kΩ).
  • The VBST pin has a series capacitor on 22 of 23 designs, most often 100 nF.
GNDpin 1Connected to: GND 100%
SWpin 2Connected to: Signal 96%
  • Series capacitor on 96% · 100 nF (22)
  • Inductor on 96% · 3.3 µH (8), 2.2 µH (6), 4.7 µH (5)
VINpin 3Connected to: 12V 87%
  • Decoupling capacitor on 78% · 10 µF (19), 100 nF (11), 22 µF (6)
VFBpin 4Connected to: Signal 96%
  • Resistor to GND on 96% · 10 kΩ (20), 3 kΩ (1), 1.8 kΩ (1)
  • Pull-up to 3.3V on 65% · 33.2 kΩ (6), 54.9 kΩ (3), 56.2 kΩ (2)
  • Series resistor on 30% · 54.9 kΩ (3), 55 kΩ (1), 33.2 kΩ (1)
ENpin 5Connected to: Signal 57% · 12V 39%
  • Pull-up to 12V on 35% · 10 kΩ (6), 100 kΩ (2)
  • Capacitor to GND on 30% · 10 µF (9), 100 nF (4)
VBSTpin 6Connected to: Signal 96%
  • Series capacitor on 96% · 100 nF (22)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include STM32-Quadcopter by I-M-Robotics-Lab, Switching Supply TPS563208 MCI by baldengineer, Rocket power board by waterloo-rocketry and PowerRev2 by cculpepper.

The TPS563200 in open source designs

The gallery holds 24 open source boards using the TPS563200 from 23 GitHub repositories; a typical one measures about 70 × 69.8 mm and carries around 60 components.

54% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is STM32-Quadcopter by I-M-Robotics-Lab.

Parts used alongside the TPS563200

Microcontrollers on boards using the TPS563200

TPS563200: common questions

Where can I find a TPS563200 reference design?

Each of the 24 boards on this page is a real design using the TPS563200. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TPS563200 SW pin connected?

The SW pin has a series capacitor on 22 of 23 designs, most often 100 nF. Counted from the KiCad layouts of 23 open source designs using the TPS563200.

What resistor goes on the TPS563200 VFB pin?

The VFB pin has a resistor to GND on 22 of 23 designs, most often 10 kΩ (then 3 kΩ). Counted from the KiCad layouts of 23 open source designs using the TPS563200.

How is the TPS563200 VBST pin connected?

The VBST pin has a series capacitor on 22 of 23 designs, most often 100 nF. Counted from the KiCad layouts of 23 open source designs using the TPS563200.

Which microcontrollers do boards using the TPS563200 use?

Most are built on ESP32 (7), STM32 (7), ESP8266 (1) and PIC (1).

How big is a typical board using the TPS563200?

The median is 70 × 69.8 mm, and 54% are two-layer designs.

What is the most popular open source board using the TPS563200?

By GitHub stars, STM32-Quadcopter by I-M-Robotics-Lab, with 79 stars.

Can I simulate one of these boards using the TPS563200 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part