HardLabs

Endstop switch

Froggy111·foosball-bot·v1/hardware/pcbs/endstop-switch/endstop-switch.kicad_pcb

Endstop switch PCB layout, top view — open source board by Froggy111

About the Endstop switch PCB

Endstop switch is an open source PCB design by Froggy111, published on GitHub. It is a 2-layer board measuring 52 × 40 mm, with 6 components from 6 distinct parts.

By type, the board carries 2 capacitors, 1 connector, 1 switch and 1 resistor.

Endstop switch bill of materials (BOM)

6 components, 6 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
S4B-XH-A
J1
1
SIT3088ETK
DIFF_DRV1
1
D2F-L-A
SW1
1
100nF 50V
C1
1
4.7uF 10V
C2
1
100
R1

Endstop switch design files

The KiCad project lives in the Froggy111/foosball-bot repository on GitHub; these links point at the commit this page was built from.

Endstop switch: common questions

How big is the Endstop switch PCB?

The Endstop switch measures 52 × 40 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Endstop switch?

6 components, from 6 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Endstop switch design files?

From the Froggy111/foosball-bot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Endstop switch design in my own project?

The repository has no license, so all rights stay with Froggy111. Use it as a reference, and ask the author before reusing the design.

More boards in foosball-bot