HardLabs

STM32G491CET6

Froggy111·foosball-bot·v1/hardware/pcbs/test-boards/STM32G491CET6/STM32G491CET6.kicad_pcb

STM32G491CET6 PCB layout, top view — open source STM32 board by Froggy111

About the STM32G491CET6 PCB

STM32G491CET6 is an open source STM32 PCB design by Froggy111, published on GitHub. It is a 2-layer board measuring 43 × 38 mm, with 42 components from 22 distinct parts.

Its main chip is the STM32G491CETX, from the STM32 family. By type, the board carries 14 capacitors, 9 resistors, 5 diodes, 3 connectors, 2 crystals and 2 LEDs.

Main components on the STM32G491CET6

STM32G491CETX

STM32G491CET6 bill of materials (BOM)

42 components, 22 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32G491CETX
STM32G491CETx
U1
1
CRYSTAL_GND24
Crystal_GND24
Y1
1
Crystal
Y2
2
CONN_02X10_ODD_EVEN
Conn_02x10_Odd_Even
J1, J2
1
CONN_01X04
Conn_01x04
J3
2
TS-1077S-02026
BOOT1, RESET1
1
ME6211C33M5
LDO1
1
C2765186
TYPE-C 16PIN 2MD(073)
USB1
1
JUMPER_2_BRIDGED
Jumper_2_Bridged
USBPWR1
2
C965799
LED1, LED2
2
C3758192
D1, D2
1
C22439057
D3
2
C502527
D4, D5
1
600Ω@100MHz
FB1
2
4.7PF
4.7pF
C1, C4
2
3.9PF
3.9pF
C2, C3
6
100NF
100nF
C5, C6, C7, C8, C9, C10
3
1UF
1uF
C11, C13, C14
1
10UF
10uF
C12
2
300
R1, R9
Show 2 more
QtyPartRefs
5
10K
R2, R5, R6, R7, R8
2
5.1K
R3, R4

STM32G491CET6 design files

The KiCad project lives in the Froggy111/foosball-bot repository on GitHub; these links point at the commit this page was built from.

STM32G491CET6: common questions

What microcontroller does the STM32G491CET6 use?

The STM32G491CET6 is built around the STM32G491CETX, from the STM32 family.

How big is the STM32G491CET6 PCB?

The STM32G491CET6 measures 43 × 38 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the STM32G491CET6?

42 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the STM32G491CET6 design files?

From the Froggy111/foosball-bot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the STM32G491CET6 design in my own project?

The repository has no license, so all rights stay with Froggy111. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the STM32G491CET6 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in foosball-bot

Similar boards