Radxa-CM3-carrier
About the Radxa-CM3-carrier PCB
Radxa-CM3-carrier is an open source PCB design by Froggy111, published on GitHub. It is a 4-layer board measuring 80 × 100 mm, with 46 components from 26 distinct parts.
Other key parts include the CM4102008, TCAN1057AVDRQ1 and MCP2518FD-XQBB. By type, the board carries 12 capacitors, 8 resistors, 3 ICs, 3 connectors, 2 LEDs and 1 crystal.
Main components on the Radxa-CM3-carrier
Radxa-CM3-carrier bill of materials (BOM)
46 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CM4102008 | CM4102008_MODULE_CM4102008 | U1 |
| 1 | TCAN1057AVDRQ1 | SOIC-8_L4.9-W3.9-P1.27-LS6.0-BL | U11 |
| 1 | MCP2518FD-XQBB MCP2518FD-xQBB | DFN-14-1EP_3x4.5mm_P0.65mm_EP1.65x4.25mm | U12 |
| 1 | C5261245 | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 2 | MX250-3.5-12P-A-GY01-CU-A | CONN-TH_12P-P3.50_MX250-3.5-12P-A-GY01-CU-A | CN1, CN2 |
| 1 | CONN_02X02_ODD_EVEN Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | J3 |
| 9 | TPD4E05U06DQA | USON-10_2.5x1.0mm_P0.5mm | ESD1, ESD2, ESD3, ESD4, ESD5, ESD6, ESD7, ESD8 +1 |
| 1 | GT-F1007SR20-15S0101 | FPC-SMD_15P-P1.00_GT-F1007SR20-15S0101 | FPC1 |
| 1 | FPC-05F-22PH20 | FPC-SMD_22P-P0.50_FPC-05F-22PH20 | FPC2 |
| 1 | ME6211C33M5 | SOT-23-5 | LDO1 |
| 1 | TS-1077S-02026 | SW-SMD_L3.1-W3.1-P2.20-LS4.0 | RESET1 |
| 1 | HR911130A | RJ45-TH_HR911130A | RJ1 |
| 1 | C2765186 TYPE-C 16PIN 2MD(073) | USB-C-SMD_TYPE-C-6PIN-2MD-073 | USB2 |
| 2 | JUMPER_2_BRIDGED Jumper_2_Bridged | PinHeader_1x02_P2.54mm_Vertical | USBPWR1, USBPWR2 |
| 2 | C965799 | LED_0603_1608Metric | LED1, LED2 |
| 1 | 2.2UF 2.2uF | C_0603_1608Metric | C1 |
| 1 | 2.2UF 2.2uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2 |
| 3 | 1UF 1uF | C_0603_1608Metric | C3, C13, C14 |
| 3 | 100NF 100nF | C_0603_1608Metric | C4, C39, C40 |
| 2 | 15PF 15pF | C_0603_1608Metric | C5, C6 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10UF 10uF | C_0603_1608Metric | C12 |
| 1 | 4.7NF 4.7nF | C_0603_1608Metric | C41 |
| 2 | 470R | R_0603_1608Metric | R1, R2 |
| 2 | 5.1K | R_0603_1608Metric | R3, R4 |
| 2 | 300 | R_0603_1608Metric | R5, R9 |
| 2 | 60.4 | R_0603_1608Metric | R35, R36 |
Radxa-CM3-carrier design files
The KiCad project lives in the Froggy111/foosball-bot repository on GitHub; these links point at the commit this page was built from.
Radxa-CM3-carrier: common questions
How big is the Radxa-CM3-carrier PCB?
The Radxa-CM3-carrier measures 80 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Radxa-CM3-carrier?
46 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Radxa-CM3-carrier design files?
From the Froggy111/foosball-bot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Radxa-CM3-carrier design in my own project?
The repository has no license, so all rights stay with Froggy111. Use it as a reference, and ask the author before reusing the design.
More boards in foosball-bot
STM32FOC-driver
100 × 100 mm224 parts4LNo license1
STM32BLDC-FOC
100 × 100 mm121 parts4LNo license1
STM32STM32G491CET6
43 × 38 mm42 parts2LNo license1
RP2040/RP2350Pcb
100 × 100 mm34 parts2LNo license1
Magnetic encoder
50 × 50 mm21 parts2LNo license1
Endstop switch
52 × 40 mm6 parts2LNo license1