HardLabs

Pcb

Froggy111·foosball-bot·v0/hardware/pcb/pcb.kicad_pcb

Pcb layout, top view — open source RP2040/RP2350 board by Froggy111

About the Pcb

Pcb is an open source RP2040/RP2350 PCB design by Froggy111, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 34 components from 19 distinct parts.

Its main chip is the Pico, from the RP2040/RP2350 family. By type, the board carries 4 capacitors, 4 resistors, 3 speakers, 2 transistors and 1 IC.

Main components on the Pcb

Pico

Pcb bill of materials (BOM)

34 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Pico
MCU0
2
FQD50N06
Q1, Q2
1
Conn_02x06_Odd_Even
3V3OUT_0
7
TestPoint_Probe
3V3_TP0, 5V_TP0, 6V_TP0, 36V_TP0, GND6V_TP0, GND36V_TP0, GND_TP0
2
Screw_Terminal_01x02
6VIN_0, 36VIN_0
2
CONN_01X02
Conn_01x02
EN0, RESET0
1
Conn_01x05
I2C0
3
SN74LVC1T45DBV
LS0, LS1, LS2
1
CONN_01X06
Conn_01x06
MISC0
1
ME6210A50PG
REG0
1
CONN_01X03
Conn_01x03
SERVO0
1
CONN_01X07
Conn_01x07
SPI1
2
CONN_01X04
Conn_01x04
STEPPER0, UART0
1
Pololu_Breakout_DRV8825
STEPPER_DRV0
2
100UF
100uF
C0, C1
2
10UF
10uF
C2, C3
2
100KR
100kR
R0, R2
1
6.2KR
6.2kR
R1
1
51KR
51kR
R3

Pcb design files

The KiCad project lives in the Froggy111/foosball-bot repository on GitHub; these links point at the commit this page was built from.

Pcb: common questions

What microcontroller does the Pcb use?

The Pcb is built around the Pico, from the RP2040/RP2350 family.

How big is the Pcb?

The Pcb measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pcb?

34 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pcb design files?

From the Froggy111/foosball-bot repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pcb design in my own project?

The repository has no license, so all rights stay with Froggy111. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Pcb without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in foosball-bot

Similar boards