Pd injector smd

frogro·pd-injector-smd

Pd injector smd PCB layout, top view — open source board by frogro

About the Pd injector smd PCB

Pd injector smd is an open source PCB design by frogro, published on GitHub under the CERN-OHL-1.2 license. It is a 2-layer board measuring 18.4 × 28 mm, with 8 components from 5 distinct parts.

By type, the board carries 3 resistors, 1 connector and 1 diode.

It belongs with the power & battery designs in this gallery.

From the project

PCBWay-ready USB-C PD power/data injector based on tinyledmatrix/PD-Injector-SMD

This repository provides a PCBWay turnkey-manufacturing integration for the open-hardware project tinyledmatrix/PD-Injector-SMD as a USB-C Power/Data injector for KVM-over-IP and USB-gadget deployments.

Upstream project: https://github.com/tinyledmatrix/PD-Injector-SMD

Upstream license: CERN Open Hardware Licence v1.2.

- USB-C power / PD path from a power supply - USB 2.0 D+/D- from a separate host PC - a single USB-C plug toward the target SBC

Pd injector smd, from the project README
From the project README

Pd injector smd bill of materials (BOM)

8 components, 5 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
C-UTC009-0C
USB_C_Plug_USB2.0
HRO
P1
1
9774005243R
M2x0.5mm SMD Spaccer
Würth Elektronik
H2
2
USB_C_Receptacle_USB2.0
USB-C1, USB-C2
1
LTST-C281KRKT
LED
Lite-On
D1
3
5.1K
5.1k
Yageo
R1, R2, R3

Pd injector smd design files

The KiCad project lives in the frogro/pd-injector-smd repository on GitHub; these links point at the commit this page was built from.

Pd injector smd: common questions

How big is the Pd injector smd PCB?

The Pd injector smd measures 18.4 × 28 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pd injector smd?

8 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pd injector smd design files?

From the frogro/pd-injector-smd repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Pd injector smd design in my own project?

Yes, under the terms of its CERN-OHL-1.2 license, which frogro chose for the repository.

Similar boards