Orca hana
funcoolgarage·orca-hana
About the Orca hana PCB
Orca hana is an open source PIC PCB design by funcoolgarage, published on GitHub under the MIT license. It is a 4-layer board measuring 71.1 × 35.6 mm, with 33 components from 18 distinct parts.
Its main chip is the PIC18LF45K50_TQFP, from the PIC family. Other key parts include the MCP1825S. By type, the board carries 15 capacitors, 8 resistors, 5 connectors, 2 ICs, 1 crystal and 1 switch.
From the project
Open-source PIC18(L)F45K50 module board
Orca Hana is a compact PIC18(L)F45K50-based module board designed for DIY electronics and embedded system projects.
- simplicity - learnability - open hardware - practical embedded development
All FCG design files are intended to be open and shareable. You are free to use, modify, and build upon the project, including commercial use. Please keep attribution to Funcoolgarage (FCG) and the Orca Hana project.

Main components on the Orca hana
Orca hana bill of materials (BOM)
33 components, 18 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1825S | SOT-223-3_TabPin2 | U1 |
| 1 | PIC18LF45K50_TQFP | TQFP-44_10x10_Pitch0.8mm_HandSolder | U2 |
| 1 | 12MHz, CL=8pF | Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSoldering | Y1 |
| 1 | USB_C_Receptacle | 216989-0001_MOL | J1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 2 | Conn_01x18 | PinHeader_1x18_P2.54mm_Vertical | J3, J4 |
| 1 | Molex_Conn_01x06 | Molex-22-16-2050 | P1 |
| 1 | TACTILE SW 43x43 | SW_TH_Tactile_RoHS_TS02 | SW1 |
| 1 | LED | LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 5 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C7, C8, C11 |
| 6 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C4, C9, C10, C12, C15 |
| 1 | 4.7u | CAP_Elec_4x5.5_HandSolder | C5 |
| 1 | 10u | CAP_Elec_4x5.5_HandSolder | C6 |
| 2 | 10p | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C13, C14 |
| 2 | 5.1K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 3 | 100 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R3, R4, R5 |
| 2 | 10K | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 1 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8 |
Orca hana design files
The KiCad project lives in the funcoolgarage/orca-hana repository on GitHub; these links point at the commit this page was built from.
- Layoutorca-hana.kicad_pcb
- Schematicorca-hana.kicad_sch
Orca hana: common questions
What microcontroller does the Orca hana use?
The Orca hana is built around the PIC18LF45K50_TQFP, from the PIC family.
How big is the Orca hana PCB?
The Orca hana measures 71.1 × 35.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Orca hana?
33 components, from 18 distinct parts. The full bill of materials is listed on this page.
Where can I download the Orca hana design files?
From the funcoolgarage/orca-hana repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Orca hana design in my own project?
Yes, under the terms of its MIT license, which funcoolgarage chose for the repository.
Can I test firmware for the Orca hana without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379