Diy ardubo
Fxplaysz·Half-life-diy-arduboy·DIY Aduboy SMD Flash KiCad Files/diy_ardubo.kicad_pcb
About the Diy ardubo PCB
Diy ardubo is an open source PCB design by Fxplaysz, published on GitHub. It is a 2-layer board measuring 79.5 × 88 mm, with 12 components from 9 distinct parts.
Other key parts include the ProMicro and W25Q128JVS. By type, the board carries 3 resistors, 2 ICs, 2 switches, 1 transistor, 1 connector and 1 buzzer.
It belongs with the displays & leds designs in this gallery.
From the project
Hello everyone, this is my repository for my diy arduboy. Here you'll find the pcb and the 3d models later on.
Aruduboy is a open source game console made by Kevin Bates. He has opensourced his console and made it easier for anyone to build it and have fun with it. I remember a few years back i tried making it by myself but i failed in doing so because of the technicalities in building it. So i've decided to make this project to let anyone make a DIY Arduboy easily and have fun while doing it.
Main components on the Diy ardubo
Diy ardubo bill of materials (BOM)
12 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ProMicro | ProMicro | U1 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | BC557 | TO-92_Inline | Q1 |
| 1 | CONN_01X07_PIN Conn_01x07_Pin | PinSocket_1x07_P2.54mm_Vertical | J2 |
| 1 | C | C_Disc_D3.8mm_W2.6mm_P2.50mm | 100nf |
| 1 | Buzzer | PinHeader_1x02_P2.54mm_Vertical | BZ1 |
| 2 | SW_Push | SW_Push_1TS009xxxx-xxxx-xxxx_6x6x5mm | SW5, SW6 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | TP4056 IN |
| 3 | R | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1, R2, R3 |
Diy ardubo design files
The KiCad project lives in the Fxplaysz/Half-life-diy-arduboy repository on GitHub; these links point at the commit this page was built from.
Diy ardubo: common questions
How big is the Diy ardubo PCB?
The Diy ardubo measures 79.5 × 88 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Diy ardubo?
12 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Diy ardubo design files?
From the Fxplaysz/Half-life-diy-arduboy repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Diy ardubo design in my own project?
The repository has no license, so all rights stay with Fxplaysz. Use it as a reference, and ask the author before reusing the design.
More boards in Half-life-diy-arduboy
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k