MCU DAC board
FYDP-Group-31·PCBs·MCU_DAC_board/MCU_DAC_board.kicad_pcb
About the MCU DAC board
MCU DAC board is an open source ESP32 PCB design by FYDP-Group-31, published on GitHub. It is a 2-layer board measuring 100 × 100 mm, with 94 components from 43 distinct parts.
Its main chip is the TPA3111D1PWPR, from the ESP32 family. By type, the board carries 38 resistors, 32 capacitors, 11 test points, 10 connectors, 2 ICs and 1 transistor.
Main components on the MCU DAC board
MCU DAC board bill of materials (BOM)
94 components, 43 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TPA3111D1PWPR ADAU1966AWBSTZ | ST_80_2_ADI | U1 |
| 1 | TPA3111D1PWPR ESP32-S3-DEVKITC-1-N8R2 | XCVR_ESP32-S3-DEVKITC-1-N8R2 | U2 |
| 1 | FZT953 | SOT-223-3_TabPin2 | Q1 |
| 4 | Conn_02x04_Odd_Even | BHR-08-VUA | J1, J2, J3, J4 |
| 1 | 54-00127 | TENSILITY_54-00127 | J5 |
| 1 | 105-0752-001 | CONN_0752-001 | J6 |
| 1 | A-DF_09_A_KG-T4S Screw_Terminal_01x02 | 691137710002 | J7 |
| 1 | CONN_01X03_PIN Screw_Terminal_01x02 | 691137710002 | J8 |
| 1 | CONN_01X03_PIN 105-0752-001 | CONN_0752-001 | J11 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J12 |
| 1 | MCLKI/XTALI | TP_1.8x1mm | TP1 |
| 1 | XTALO | TP_1.8x1mm | TP2 |
| 1 | MCLKO | TP_1.8x1mm | TP3 |
| 1 | I2S_BCLK | TP_1.8x1mm | TP4 |
| 1 | I2S_FS | TP_1.8x1mm | TP5 |
| 1 | DAC_*RST | TP_1.8x1mm | TP6 |
| 1 | I2S_DATA | TP_1.8x1mm | TP7 |
| 1 | I2C_SDA | TP_1.8x1mm | TP8 |
| 1 | I2C_SCL | TP_1.8x1mm | TP9 |
| 1 | TS_REF | TP_1.8x1mm | TP10 |
Show 23 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CM | TP_1.8x1mm | TP11 |
| 1 | 10n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 2 | 470n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3 |
| 2 | 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4, C18 |
| 2 | 0.1U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C19 |
| 2 | 0.47U 10u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C6, C20 |
| 1 | 0.47U 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 2 | 100U 470n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C9 |
| 1 | 0.1U 100n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C10 |
| 3 | 0.1U 4n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C24, C25 |
| 4 | 1000P 4n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C13, C26, C27 |
| 3 | 100U 4n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C14, C22, C23 |
| 3 | 4n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C15, C16, C17 |
| 1 | 0.47U 4n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C21 |
| 2 | 0.5U 4n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C28, C29 |
| 1 | 39n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C30 |
| 1 | 2.2n | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C31 |
| 1 | 100u | CP_Radial_D6.3mm_P2.50mm | C32 |
| 1 | 100K 1k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 7 | 100K 500 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2, R3, R4, R5, R6, R7, R8 |
| 25 | 500 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R9, R10, R11, R12, R13, R14, R15, R16 +17 |
| 1 | 3.32k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R34 |
| 4 | 2k | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R35, R36, R37, R40 |
MCU DAC board design files
The KiCad project lives in the FYDP-Group-31/PCBs repository on GitHub; these links point at the commit this page was built from.
MCU DAC board: common questions
What microcontroller does the MCU DAC board use?
The MCU DAC board is built around the TPA3111D1PWPR, from the ESP32 family.
How big is the MCU DAC board?
The MCU DAC board measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the MCU DAC board?
94 components, from 43 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the MCU DAC board design files?
From the FYDP-Group-31/PCBs repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the MCU DAC board design in my own project?
The repository has no license, so all rights stay with FYDP-Group-31. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the MCU DAC board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
More boards in PCBs
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k