IcepiZero AD9280 AD9708 2x12 Pmod
gallicchio·AMOD-and-RFMOD·icepi_adapter/IcepiZero_AD9280_AD9708_2x12_Pmod.kicad_pcb
About the IcepiZero AD9280 AD9708 2x12 Pmod PCB
IcepiZero AD9280 AD9708 2x12 Pmod is an open source PCB design by gallicchio, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 80 × 30 mm, with 5 components from 5 distinct parts.
By type, the board carries 3 connectors and 2 capacitors.
From the project
The tutorial's 2x12 adapter (~/mudd/133electronics/icepi-zero-dac-adc/adapterboard/`) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod plugs while the AD9280/AD9708 module sits on top as before.
The tutorial's 2x12 adapter (~/mudd/133electronics/icepi-zero-dac-adc/adapterboard/`) with a 2 x 6 right-angle Pmod socket on a 15 mm extension of its right-hand end, so an Icepi Zero can drive AMOD-A's and RF-MOD's Pmod plugs while the AD9280/AD9708 module sits on top as before.
- Source of truth: ~/OpticsPCBs/IcepiZeroADCDAC/adapters/makeboards.py, board adda12p (the generator that drew every adapter). These files are copies of its out/IcepiZeroAD9280AD97082x12Pmod/; rebuild there with KICAD=10 ../kicad-python.sh makeboards.py adda12p and copy back. Its README section "The 2x12 with a…

IcepiZero AD9280 AD9708 2x12 Pmod bill of materials (BOM)
5 components, 5 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Icepi Zero GPIO | PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | HS-AD/DA V2.0 AD9280 ADC + AD9708 DAC, plus a Pmod | PinHeader_2x12_P2.54mm_Vertical | J2 |
| 1 | Pmod | PinSocket_2x06_P2.54mm_Horizontal | J3 |
| 1 | 10uF/16V | C_0805_2012Metric | C1 |
| 1 | 100nF | C_0603_1608Metric | C2 |
IcepiZero AD9280 AD9708 2x12 Pmod design files
The KiCad project lives in the gallicchio/AMOD-and-RFMOD repository on GitHub; these links point at the commit this page was built from.
IcepiZero AD9280 AD9708 2x12 Pmod: common questions
How big is the IcepiZero AD9280 AD9708 2x12 Pmod PCB?
The IcepiZero AD9280 AD9708 2x12 Pmod measures 80 × 30 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the IcepiZero AD9280 AD9708 2x12 Pmod?
5 components, from 5 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IcepiZero AD9280 AD9708 2x12 Pmod design files?
From the gallicchio/AMOD-and-RFMOD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IcepiZero AD9280 AD9708 2x12 Pmod design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which gallicchio chose for the repository.
More boards in AMOD-and-RFMOD
Phmod
gallicchio
100 × 100 mm234 parts4LCERN-OHL-P-2.00Amod c
gallicchio
100 × 100 mm211 parts4LCERN-OHL-P-2.00Amod m
gallicchio
100 × 100 mm207 parts4LCERN-OHL-P-2.00Amod a
gallicchio
100 × 100 mm188 parts4LCERN-OHL-P-2.00Iq mod
gallicchio
100 × 100 mm186 parts4LCERN-OHL-P-2.00Rf mod
gallicchio
100 × 100 mm168 parts4LCERN-OHL-P-2.00Amod b
gallicchio
100 × 100 mm143 parts4LCERN-OHL-P-2.00Amod p
gallicchio
100 × 100 mm143 parts2LCERN-OHL-P-2.00Amod n
gallicchio
100 × 100 mm88 parts4LCERN-OHL-P-2.00