Amod p
gallicchio·AMOD-and-RFMOD·hardware/amod_p.kicad_pcb
About the Amod p PCB
Amod p is an open source PCB design by gallicchio, published on GitHub under the CERN-OHL-P-2.0 license. It is a 2-layer board measuring 100 × 100 mm, with 143 components from 42 distinct parts.
By type, the board carries 39 capacitors, 29 connectors, 27 test points, 27 inductors, 10 resistors and 4 LEDs.
It belongs with the audio, robotics & motion and rf & radio designs in this gallery.
From the project
Nine 100 x 100 mm boards of "tiles" for an FPGA with fast converters: seven first-level boards (for the ECP5-2ADC-2DAC board, or an Icepi Zero with its AD9280/AD9708 module), among them AMOD-N, as simple as the first, the conversion board AMOD-C and two motor boards, AMOD-M (brus
Nine 100 x 100 mm boards of "tiles" for an FPGA with fast converters: seven first-level boards (for the ECP5-2ADC-2DAC board, or an Icepi Zero with its AD9280/AD9708 module), among them AMOD-N, as simple as the first, the conversion board AMOD-C and two motor boards, AMOD-M (brushed motors and actuators) and AMOD-B (a brushless gimbal motor), and two second-level boards built around the ECP5-2ADC-2DAC board's two DACs and two ADCs: PhMOD (AMOD-2 until Prompt 17) and IQ-MOD. Each tile is one circuit with its own SMA jacks: cable a DAC to its input and its output to an ADC, and compare the…

Amod p bill of materials (BOM)
143 components, 42 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | X49SM4MSD2SC 4 MHz | Crystal_HC49-S_SMD | Y801 |
| 1 | KCR455E 455 kHz | Resonator_Ceramic_2Pin_P5.00mm_KCR455E | Y901 |
| 27 | BWSMA-KE-Z001 SMA | SMA_BWSMA-KE-Z001_Vertical | J101, J102, J201, J202, J301, J302, J401, J402 +19 |
| 1 | KF301-5.0-3P coil | TerminalBlock_KF301_1x03_P5.00mm | J1302 |
| 1 | KF301-5.0-2P VAR C | TerminalBlock_KF301_1x02_P5.00mm | J1303 |
| 1 | DSHP02TSGET DIP2 | SW_DIP_SPSTx02_Slide_1.27mm_DSHP02 | SW401 |
| 2 | DSHP04TSGET DIP4 | SW_DIP_SPSTx04_Slide_1.27mm_DSHP04 | SW1201, SW1301 |
| 11 | RH-5019 IN | TestPoint_Loop_RH-5019 | TP101, TP201, TP301, TP401, TP501, TP601, TP701, TP801 +3 |
| 9 | RH-5019 OUT | TestPoint_Loop_RH-5019 | TP102, TP202, TP302, TP502, TP602, TP702, TP802, TP902 +1 |
| 1 | RH-5019 LED | TestPoint_Loop_RH-5019 | TP1201 |
| 1 | RH-5019 TAP | TestPoint_Loop_RH-5019 | TP1301 |
| 1 | RH-5019 HOT | TestPoint_Loop_RH-5019 | TP1302 |
| 4 | RH-5019 GND | TestPoint_Loop_RH-5019 | TP9901, TP9902, TP9903, TP9904 |
| 1 | NCD0805R1 red | LED_0805_2012Metric_Kbar | LED1201 |
| 1 | KT-0805Y yellow | LED_0805_2012Metric_Kbar | LED1202 |
| 1 | KT-0805G green | LED_0805_2012Metric_Kbar | LED1203 |
| 1 | KT-0805B blue | LED_0805_2012Metric_Kbar | LED1204 |
| 2 | 1N4148W | D_SOD-123 | D1001, D1002 |
| 1 | NLV32T-101J-PF 100uH | L_1210_3225Metric | L401 |
| 2 | SDFL2012Q1R5KTF 1.5uH | L_0805_2012Metric | L501, L502 |
Show 22 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NLCV32T-151K-EF 150uH | L_1210_3225Metric | L601 |
| 2 | SDFL1608Q2R7KTF 2.7uH | L_0603_1608Metric | L701, L703 |
| 1 | CS0603-R33J-S 330nH | L_0603_1608Metric | L702 |
| 20 | SDFL1608Q1R0KTF 1u | L_0603_1608Metric | L1101, L1102, L1103, L1104, L1105, L1106, L1107, L1108 +12 |
| 2 | 0805CG102J500NT 1nF | C_0805_2012Metric | C201, C301 |
| 3 | 0805CG221J500NT 220pF | C_0805_2012Metric | C401, C501, C503 |
| 1 | CL10C101JB8NNNC 100p | C_0603_1608Metric | C402 |
| 1 | CL10C470JB8NNNC 47p | C_0603_1608Metric | C403 |
| 1 | 0805CG681J500NT 680pF | C_0805_2012Metric | C502 |
| 4 | 0805CG103J500NT 10nF | C_0805_2012Metric | C601, C602, C603, C604 |
| 2 | 0603CG271J500NT 270pF | C_0603_1608Metric | C701, C703 |
| 1 | 0603CG222J500NT 2.2nF | C_0603_1608Metric | C702 |
| 20 | CC0402JRNPO9BN391 390p | C_0402_1005Metric | C1101, C1102, C1103, C1104, C1105, C1106, C1107, C1108 +12 |
| 1 | CL21C470JBANNNC 47p | C_0805_2012Metric | C1301 |
| 1 | CL21C101JBANNNC 100p | C_0805_2012Metric | C1302 |
| 1 | 0805CG221J500NT 220p | C_0805_2012Metric | C1303 |
| 1 | 0805CG471J500NT 470p | C_0805_2012Metric | C1304 |
| 2 | 0805W8F619JT5E 61.9R | R_0805_2012Metric | R101, R103 |
| 1 | 0805W8F2490T5E 249R | R_0805_2012Metric | R102 |
| 3 | 0805W8F1001T5E 1k | R_0805_2012Metric | R201, R301, R1001 |
| 3 | 0805W8F4700T5E 470 | R_0805_2012Metric | R1101, R1102, R1103 |
| 1 | 0805W8F1000T5E 100 | R_0805_2012Metric | R1201 |
Amod p design files
The KiCad project lives in the gallicchio/AMOD-and-RFMOD repository on GitHub; these links point at the commit this page was built from.
Amod p: common questions
How big is the Amod p PCB?
The Amod p measures 100 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Amod p?
143 components, from 42 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Amod p design files?
From the gallicchio/AMOD-and-RFMOD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Amod p design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which gallicchio chose for the repository.
More boards in AMOD-and-RFMOD
Phmod
gallicchio
100 × 100 mm234 parts4LCERN-OHL-P-2.00Amod c
gallicchio
100 × 100 mm211 parts4LCERN-OHL-P-2.00Amod m
gallicchio
100 × 100 mm207 parts4LCERN-OHL-P-2.00Amod a
gallicchio
100 × 100 mm188 parts4LCERN-OHL-P-2.00Iq mod
gallicchio
100 × 100 mm186 parts4LCERN-OHL-P-2.00Rf mod
gallicchio
100 × 100 mm168 parts4LCERN-OHL-P-2.00Amod b
gallicchio
100 × 100 mm143 parts4LCERN-OHL-P-2.00Amod n
gallicchio
100 × 100 mm88 parts4LCERN-OHL-P-2.00IcepiZero AD9280 AD9708 2x12 Pmod
gallicchio
80 × 30 mm5 parts4LCERN-OHL-P-2.00
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kPowerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979