Amod a
gallicchio·AMOD-and-RFMOD·hardware/amod_a.kicad_pcb
About the Amod a PCB
Amod a is an open source PCB design by gallicchio, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 100 × 100 mm, with 188 components from 61 distinct parts.
Other key parts include the LM2664M6X/NOPB, TPS7A2033PDBVR, OPA810IDBVR, OPA847IDBVT and TLV3501AIDBVR. By type, the board carries 59 resistors, 45 capacitors, 29 connectors, 16 ICs, 12 transistors and 12 switches.
It belongs with the robotics & motion, audio and rf & radio designs in this gallery.
From the project
Nine 100 x 100 mm boards of "tiles" for an FPGA with fast converters: seven first-level boards (for the ECP5-2ADC-2DAC board, or an Icepi Zero with its AD9280/AD9708 module), among them AMOD-N, as simple as the first, the conversion board AMOD-C and two motor boards, AMOD-M (brus
Nine 100 x 100 mm boards of "tiles" for an FPGA with fast converters: seven first-level boards (for the ECP5-2ADC-2DAC board, or an Icepi Zero with its AD9280/AD9708 module), among them AMOD-N, as simple as the first, the conversion board AMOD-C and two motor boards, AMOD-M (brushed motors and actuators) and AMOD-B (a brushless gimbal motor), and two second-level boards built around the ECP5-2ADC-2DAC board's two DACs and two ADCs: PhMOD (AMOD-2 until Prompt 17) and IQ-MOD. Each tile is one circuit with its own SMA jacks: cable a DAC to its input and its output to an ADC, and compare the…

Main components on the Amod a
Amod a bill of materials (BOM)
188 components, 61 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2664M6X/NOPB LM2664 | SOT-23-6 | U101 |
| 1 | TPS7A2033PDBVR 3.3V | SOT-23-5 | U102 |
| 7 | OPA810IDBVR OPA810 | SOT-23-5 | U201, U301, U501, U1001, U1002, U1102, U1202 |
| 1 | OPA847IDBVT OPA847 | SOT-23-6 | U401 |
| 1 | TLV3501AIDBVR TLV3501 | SOT-23-6 | U601 |
| 1 | 74HC4046APW-Q100J 74HC4046A | TSSOP-16_4.4x5mm_P0.65mm | U701 |
| 1 | TMP235A4DBZR TMP235 | SOT-23 | U801 |
| 1 | MC1496DR2G MC1496 | SOIC-14_3.9x8.7mm_P1.27mm | U901 |
| 1 | DRV8837DSGR DRV8837 | Texas_DSG0008A_WSON-8-1EP_2x2mm_P0.5mm_EP0.9x1.6mm | U1101 |
| 1 | PAM8302AASCR PAM8302A | MSOP-8_3x3mm_P0.65mm | U1201 |
| 11 | AO3401A | SOT-23 | Q201, Q301, Q401, Q501, Q601, Q701, Q801, Q901 +3 |
| 1 | AO3400A | SOT-23 | Q802 |
| 1 | TYPE-C-31-M-12 USB-C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J101 |
| 1 | PZ254-1-05-Z-8.5 rails | PinSocket_1x05_P2.54mm_Vertical | J102 |
| 21 | BWSMA-KE-Z001 SMA | SMA_BWSMA-KE-Z001_Vertical | J201, J202, J301, J302, J401, J402, J501, J601 +13 |
| 1 | PZ254V-11-03P HB100 | PinHeader_1x03_P2.54mm_Vertical | J502 |
| 1 | PZ254-1-05-Z-8.5 TX | PinSocket_1x05_P2.54mm_Vertical | J1102 |
| 1 | PZ254-1-05-Z-8.5 RX | PinSocket_1x05_P2.54mm_Vertical | J1103 |
| 1 | PZ254R-12-12P Pmod | PinHeader_2x06_P2.54mm_Horizontal_PZ254R-12-12P | J1104 |
| 1 | KF301-5.0-2P SPK | TerminalBlock_KF301_1x02_P5.00mm | J1203 |
Show 41 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PZ254-1-02-Z-8.5 MIC | PinSocket_1x02_P2.54mm_Vertical | J1204 |
| 1 | MF-MSMF200-2 2A | Fuse_1812_4532Metric | F101 |
| 11 | MSK12C02 ON | SW_SPDT_Shouhan_MSK12C02 | SW201, SW301, SW401, SW501, SW601, SW701, SW801, SW901 +3 |
| 1 | DSHP04TSGET DIP4 | SW_DIP_SPSTx04_Slide_1.27mm_DSHP04 | SW1002 |
| 6 | RH-5019 OUT | TestPoint_Loop_RH-5019 | TP201, TP301, TP401, TP501, TP1101, TP1201 |
| 1 | RH-5019 BIT | TestPoint_Loop_RH-5019 | TP601 |
| 4 | RH-5019 GND | TestPoint_Loop_RH-5019 | TP9901, TP9902, TP9903, TP9904 |
| 1 | NCD0805R1 -5V | LED_0805_2012Metric_Kbar | LED101 |
| 1 | KT-0805G +5V | LED_0805_2012Metric_Kbar | LED102 |
| 1 | SMAJ5.0A | D_SMA | D101 |
| 5 | CL21A106KAYNNNE 10u | C_0805_2012Metric | C101, C102, C103, C104, C1205 |
| 4 | CL21B105KBFNNNE 1u | C_0805_2012Metric | C105, C106, C501, C1201 |
| 25 | CC0603KRX7R9BB104 100n | C_0603_1608Metric | C201, C202, C301, C302, C401, C402, C502, C503 +17 |
| 3 | 0805CG103J500NT 10n | C_0805_2012Metric | C601, C1103, C1202 |
| 2 | CC0805KRX7R9BB104 100n | C_0805_2012Metric | C602, C603 |
| 3 | CL05B104KO5NNNC 100n | C_0402_1005Metric | C701, C702, C704 |
| 1 | 0402B102K500NT 1n | C_0402_1005Metric | C703 |
| 2 | CL10A105KB8NNNC 1u | C_0603_1608Metric | C1203, C1206 |
| 2 | 0805W8F5101T5E 5.1k | R_0805_2012Metric | R101, R102 |
| 2 | 0805W8F1001T5E 1k | R_0805_2012Metric | R103, R104 |
| 12 | SR0603FR-7T49R9L 49.9 | R_0603_1608Metric | R201, R203, R301, R303, R401, R403, R503, R1001 +4 |
| 10 | 0603WAF1002T5E 10k | R_0603_1608Metric | R202, R302, R502, R602, R803, R909, R910, R1102 +2 |
| 1 | 0603WAF1101T5E 1.1k | R_0603_1608Metric | R204 |
| 4 | 0603WAF1000T5E 100R | R_0603_1608Metric | R304, R504, R1104, R1205 |
| 3 | 0603WAF1001T5E 1k | R_0603_1608Metric | R402, R1002, R1004 |
| 1 | 0603WAF100JT5E 10R | R_0603_1608Metric | R404 |
| 1 | 0402WGF1003TCE 100k | R_0402_1005Metric | R501 |
| 3 | 0805W8F1002T5E 10k | R_0805_2012Metric | R601, R603, R604 |
| 2 | 0402WGF1001TCE 1k | R_0402_1005Metric | R701, R902 |
| 2 | 0402WGF1002TCE 10k | R_0402_1005Metric | R702, R703 |
| 2 | 0402WGF4700TCE 470 | R_0402_1005Metric | R704, R1006 |
| 2 | 25121WF150JT4E 15R | R_2512_6332Metric | R801, R802 |
| 4 | 0402WGF510JTCE 51 | R_0402_1005Metric | R901, R903, R907, R908 |
| 1 | 0402WGF3901TCE 3.9k | R_0402_1005Metric | R904 |
| 1 | 0402WGF1501TCE 1.5k | R_0402_1005Metric | R905 |
| 1 | 0805W8F1501T5E 1.5k | R_0805_2012Metric | R906 |
| 1 | 0402WGF470JTCE 47 | R_0402_1005Metric | R1005 |
| 1 | 0402WGF4701TCE 4.7k | R_0402_1005Metric | R1007 |
| 1 | 0402WGF4702TCE 47k | R_0402_1005Metric | R1008 |
| 1 | 0805W8F3901T5E 3.9k | R_0805_2012Metric | R1101 |
| 1 | 0805W8F2201T5E 2.2k | R_0805_2012Metric | R1202 |
Amod a design files
The KiCad project lives in the gallicchio/AMOD-and-RFMOD repository on GitHub; these links point at the commit this page was built from.
Amod a: common questions
How big is the Amod a PCB?
The Amod a measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Amod a?
188 components, from 61 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Amod a design files?
From the gallicchio/AMOD-and-RFMOD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Amod a design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which gallicchio chose for the repository.
More boards in AMOD-and-RFMOD
Phmod
gallicchio
100 × 100 mm234 parts4LCERN-OHL-P-2.00Amod c
gallicchio
100 × 100 mm211 parts4LCERN-OHL-P-2.00Amod m
gallicchio
100 × 100 mm207 parts4LCERN-OHL-P-2.00Iq mod
gallicchio
100 × 100 mm186 parts4LCERN-OHL-P-2.00Rf mod
gallicchio
100 × 100 mm168 parts4LCERN-OHL-P-2.00Amod b
gallicchio
100 × 100 mm143 parts4LCERN-OHL-P-2.00Amod p
gallicchio
100 × 100 mm143 parts2LCERN-OHL-P-2.00Amod n
gallicchio
100 × 100 mm88 parts4LCERN-OHL-P-2.00IcepiZero AD9280 AD9708 2x12 Pmod
gallicchio
80 × 30 mm5 parts4LCERN-OHL-P-2.00
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kPowerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979