Amod n
gallicchio·AMOD-and-RFMOD·hardware/amod_n.kicad_pcb
About the Amod n PCB
Amod n is an open source PCB design by gallicchio, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 100 × 100 mm, with 88 components from 33 distinct parts.
Other key parts include the ADP-2-1+ and PE43711B-Z. By type, the board carries 29 connectors, 24 resistors, 13 capacitors, 6 test points, 4 inductors and 3 switches.
It belongs with the audio, robotics & motion and rf & radio designs in this gallery.
From the project
Nine 100 x 100 mm boards of "tiles" for an FPGA with fast converters: seven first-level boards (for the ECP5-2ADC-2DAC board, or an Icepi Zero with its AD9280/AD9708 module), among them AMOD-N, as simple as the first, the conversion board AMOD-C and two motor boards, AMOD-M (brus
Nine 100 x 100 mm boards of "tiles" for an FPGA with fast converters: seven first-level boards (for the ECP5-2ADC-2DAC board, or an Icepi Zero with its AD9280/AD9708 module), among them AMOD-N, as simple as the first, the conversion board AMOD-C and two motor boards, AMOD-M (brushed motors and actuators) and AMOD-B (a brushless gimbal motor), and two second-level boards built around the ECP5-2ADC-2DAC board's two DACs and two ADCs: PhMOD (AMOD-2 until Prompt 17) and IQ-MOD. Each tile is one circuit with its own SMA jacks: cable a DAC to its input and its output to an ADC, and compare the…

Main components on the Amod n
Amod n bill of materials (BOM)
88 components, 33 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ADP-2-1+ | MiniCircuits_CD636_ADP-2-1 | U301 |
| 1 | PE43711B-Z PE43711 | QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U801 |
| 1 | AO3401A | SOT-23 | Q901 |
| 1 | MMBT3904(RANGE:100-300) MMBT3904 | SOT-23 | Q902 |
| 28 | BWSMA-KE-Z001 SMA | SMA_BWSMA-KE-Z001_Vertical | J101, J102, J103, J104, J105, J106, J201, J202 +20 |
| 1 | PZ254R-12-12P Pmod | PinHeader_2x06_P2.54mm_Horizontal_PZ254R-12-12P | J803 |
| 1 | LFCN-1000+ | Filter_LTCC_1206_LFCN | FL501 |
| 1 | DSHP08TSGET SPI / dB | SW_DIP_SPSTx08_Slide_1.27mm_DSHP08 | SW801 |
| 1 | MSK12C02 ON | SW_SPDT_Shouhan_MSK12C02 | SW901 |
| 1 | DSHP02TSGET LOAD | SW_DIP_SPSTx02_Slide_1.27mm_DSHP02 | SW1101 |
| 1 | TC1-1TG2+ | MiniCircuits_AT224_5P | T1001 |
| 1 | TC4-1W+ | MiniCircuits_AT224_5P | T1101 |
| 1 | RH-5019 DC | TestPoint_Loop_RH-5019 | TP701 |
| 5 | RH-5019 GND | TestPoint_Loop_RH-5019 | TP702, TP9901, TP9902, TP9903, TP9904 |
| 1 | SMS7630-006LF SMS7630 | SOT-23 | D601 |
| 1 | BB133 | D_SOD-323 | D901 |
| 1 | LQW15AN27NG80D 27n | L_0402_1005Metric | L701 |
| 1 | CS0603-R33J-S 330n | L_0603_1608Metric | L702 |
| 2 | NLV32T-100J-PF 10u | L_1210_3225Metric | L703, L901 |
| 1 | CL05B103KB5NNNC 10n | C_0402_1005Metric | C601 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0402CG101J500NT 100p | C_0402_1005Metric | C602 |
| 6 | CL05B104KO5NNNC 100n | C_0402_1005Metric | C701, C702, C801, C802, C803, C906 |
| 2 | 0402CG221J500NT 220p | C_0402_1005Metric | C901, C902 |
| 1 | 0402CG220J500NT 22p | C_0402_1005Metric | C903 |
| 1 | 0402B102K500NT 1n | C_0402_1005Metric | C904 |
| 1 | 0402CG2R2C500NT 2.2p | C_0402_1005Metric | C905 |
| 2 | 0402WGF1000TCE 100 | R_0402_1005Metric | R101, R102 |
| 3 | CRCW040249R9FKEDHP 49.9 | R_0402_1005Metric | R103, R104, R1102 |
| 3 | 0402WGF169JTCE 16.9 | R_0402_1005Metric | R201, R202, R203 |
| 1 | 0402WGF510JTCE 51 | R_0402_1005Metric | R601 |
| 13 | 0402WGF1003TCE 100k | R_0402_1005Metric | R602, R801, R802, R803, R804, R805, R806, R807 +5 |
| 1 | 0402WGF6800TCE 680 | R_0402_1005Metric | R901 |
| 1 | 0402WGF2000TCE 200 | R_0402_1005Metric | R1101 |
Amod n design files
The KiCad project lives in the gallicchio/AMOD-and-RFMOD repository on GitHub; these links point at the commit this page was built from.
Amod n: common questions
How big is the Amod n PCB?
The Amod n measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Amod n?
88 components, from 33 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Amod n design files?
From the gallicchio/AMOD-and-RFMOD repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Amod n design in my own project?
Yes, under the terms of its CERN-OHL-P-2.0 license, which gallicchio chose for the repository.
More boards in AMOD-and-RFMOD
Phmod
gallicchio
100 × 100 mm234 parts4LCERN-OHL-P-2.00Amod c
gallicchio
100 × 100 mm211 parts4LCERN-OHL-P-2.00Amod m
gallicchio
100 × 100 mm207 parts4LCERN-OHL-P-2.00Amod a
gallicchio
100 × 100 mm188 parts4LCERN-OHL-P-2.00Iq mod
gallicchio
100 × 100 mm186 parts4LCERN-OHL-P-2.00Rf mod
gallicchio
100 × 100 mm168 parts4LCERN-OHL-P-2.00Amod b
gallicchio
100 × 100 mm143 parts4LCERN-OHL-P-2.00Amod p
gallicchio
100 × 100 mm143 parts2LCERN-OHL-P-2.00IcepiZero AD9280 AD9708 2x12 Pmod
gallicchio
80 × 30 mm5 parts4LCERN-OHL-P-2.00
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kPowerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Trollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979