RAM2GS
garrettsworkshop·RAM2GS·Hardware/LCMXO2/RAM2GS.kicad_pcb
About the RAM2GS PCB
RAM2GS is an open source FPGA PCB design by garrettsworkshop, published on GitHub under the Custom license license. It is a 4-layer board measuring 67.3 × 48.5 mm, with 62 components from 22 distinct parts.
Its main chip is the LCMXO2-640HC-4TG100C, from the FPGA family. Other key parts include the W9812G6KH-6, 60M, 74AHCT245PW, 74LVC245APW and AZ1117CH-3.3TRG1. By type, the board carries 30 capacitors, 13 resistors, 11 ICs, 2 connectors and 1 diode.
From the project
8 MB RAM expansion card for Apple IIgs
Main components on the RAM2GS
RAM2GS bill of materials (BOM)
62 components, 22 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LCMXO2-640HC-4TG100C | TQFP-100_14x14mm_P0.5mm | U1 |
| 1 | W9812G6KH-6 | TSOP-II-54_22.2x10.16mm_P0.8mm | U2 |
| 1 | 60M | Crystal_SMD_7050-4Pin_7.0x5.0mm_SiTime | U3 |
| 1 | 74AHCT245PW | TSSOP-20_4.4x6.5mm_P0.65mm | U4 |
| 3 | 74LVC245APW | TSSOP-20_4.4x6.5mm_P0.65mm | U5, U6, U7 |
| 1 | AZ1117CH-3.3TRG1 | SOT-223 | U8 |
| 1 | 74LVC1G04GW | SOT-353 | U9 |
| 1 | DNP | SOT-353 | U10 |
| 1 | AP2127K-1.2TRG1 | SOT-23-5 | U11 |
| 1 | IIgs RAM Exp. | AppleIIgsMemoryExpansion_Edge | J1 |
| 1 | JTAG | Tag-Connect_TC2050-IDC-FP_2x05_P1.27mm_Vertical | J2 |
| 4 | ~ | PasteHole_1.152mm_NPTH | H1, H2, H3, H4 |
| 1 | ~ | PasteHole_1.1mm_PTH | H5 |
| 1 | Amber | LED_0805 | D1 |
| 5 | 10U 10u | C_0805 | C1, C2, C3, C4, C26 |
| 24 | 2U2 2u2 | C_0603 | C5, C6, C7, C8, C9, C10, C11, C12 +16 |
| 1 | 22P 22p | C_0603 | C30 |
| 3 | 10K 10k | R_0603 | R1, R7, R10 |
| 4 | DNP | R_0603 | R2, R3, R8, R9 |
| 1 | 0 | R_0805 | R4 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 47 | R_0603 | R5, R11, R12, R13 |
| 1 | 220 | R_0805 | R6 |
RAM2GS design files
The KiCad project lives in the garrettsworkshop/RAM2GS repository on GitHub; these links point at the commit this page was built from.
RAM2GS: common questions
What microcontroller does the RAM2GS use?
The RAM2GS is built around the LCMXO2-640HC-4TG100C, from the FPGA family.
How big is the RAM2GS PCB?
The RAM2GS measures 67.3 × 48.5 mm, has 4 copper layers and is 1.6108 mm thick.
How many components are on the RAM2GS?
62 components, from 22 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the RAM2GS design files?
From the garrettsworkshop/RAM2GS repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the RAM2GS design in my own project?
It is published under Custom license, which limits how it may be reused; read the license before building on it.
Can I test firmware for the RAM2GS without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765