8 open source boards using the 74LVC245APW

Real designs built with the 74LVC245APW, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the 74LVC245APW

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 74LVC245APW connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 2.2 µF.
  • The OE pin is tied to GND on 4 of 6 designs (a signal on 2).
A0pin 2Connected to: A connector 67%
  • Series resistor on 33% · 455 Ω (1), 1 kΩ (1)
GNDpin 10Connected to: GND 83% · a signal 17%
OEpin 19Connected to: GND 67% · a signal 33%
VCCpin 20Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 67% · 2.2 µF (5)

16 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include GB-BENCH-G1 by Gekkio, .C68 by ProbablyNotArtyom, RAM2GS by garrettsworkshop and RAM2E by garrettsworkshop.

The 74LVC245APW in open source designs

The gallery holds 8 open source boards using the 74LVC245APW from 6 GitHub repositories; a typical one measures about 88 × 60.2 mm and carries around 85 components.

88% use four copper layers or more, and 50% carry an open source license.

The most starred is GB-BENCH-G1 by Gekkio.

Microcontrollers on boards using the 74LVC245APW

What boards using the 74LVC245APW are built for

74LVC245APW: common questions

Where can I find a 74LVC245APW reference design?

Each of the 8 boards on this page is a real design using the 74LVC245APW. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74LVC245APW VCC pin?

The VCC pin has a decoupling capacitor on 4 of 6 designs, most often 2.2 µF. Counted from the KiCad layouts of 6 open source designs using the 74LVC245APW.

How is the 74LVC245APW OE pin connected?

The OE pin is tied to GND on 4 of 6 designs (a signal on 2). Counted from the KiCad layouts of 6 open source designs using the 74LVC245APW.

What parts are used alongside the 74LVC245APW?

The XC6206P332MR, 74AHCT245PW, AP2127K-1.2TRG1, CH340G and LCMXO2-640HC-4TG100C appear in the most repositories here.

Which microcontrollers do boards using the 74LVC245APW use?

Most are built on PIC (4) and FPGA (3).

How big is a typical board using the 74LVC245APW?

The median is 88 × 60.2 mm, and 13% are two-layer designs.

What is the most popular open source board using the 74LVC245APW?

By GitHub stars, GB-BENCH-G1 by Gekkio, with 379 stars.

Can I simulate one of these boards using the 74LVC245APW before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part