SAPR-Course-Project

Garun-mp4·SAPR-Course-Project·hardware/SAPR-001-E3.kicad_sch

This repository ships a schematic but no board layout.

About the SAPR-Course-Project PCB

SAPR-Course-Project is an open source ESP32 PCB design by Garun-mp4, published on GitHub. It is a board, with 12 components from 12 distinct parts.

Its main chip is the ESP32-DevKitC-32E V4, from the ESP32 family. Other key parts include the Adafruit SCD41 #5190 and Pololu №2811 (SV). By type, the board carries 4 modules, 2 crystals, 2 resistors, 1 fuse and 1 capacitor.

It belongs with the iot & wireless designs in this gallery.

From the project

Курсовой проект по САПР для одной комнаты. ESP32 читает SCD41, управляет вытяжным вентилятором и проверяет вращение по тахометру. Телеметрия совместима с API AirCheck.

Курсовой проект по САПР для одной комнаты. ESP32 читает SCD41, управляет вытяжным вентилятором и проверяет вращение по тахометру. Телеметрия совместима с API AirCheck.

Проект рассчитан на монтаж из готовых модулей. Питание, защиту и порядок первого включения описывает электрическая часть. Координаты опор и отверстий указаны в документации корпуса. Физическую посадку и работу собранного оборудования проверяют при изготовлении первого образца.

Main components on the SAPR-Course-Project

ESP32-DevKitC-32E V4Adafruit SCD41 #5190Pololu №2811 (SV)

SAPR-Course-Project bill of materials (BOM)

12 components, 12 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-DevKitC-32E V4
A1
1
Adafruit SCD41 #5190
A2
1
Pololu №2811 (SV)
A3
1
Noctua NF-A8 FLX
M1
1
12 В / 1 А
X1
1
Вентилятор, 3 контакта
X2
1
T 0,5 А
F1
1
SMAJ12A
VD1
1
SS14
VD2
1
47 µF / 25 V
C1
1
4.7 kΩ
R1
1
10 kΩ
R2

SAPR-Course-Project design files

The KiCad project lives in the Garun-mp4/SAPR-Course-Project repository on GitHub; these links point at the commit this page was built from.

SAPR-Course-Project: common questions

What microcontroller does the SAPR-Course-Project use?

The SAPR-Course-Project is built around the ESP32-DevKitC-32E V4, from the ESP32 family.

How many components are on the SAPR-Course-Project?

12 components, from 12 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SAPR-Course-Project design files?

From the Garun-mp4/SAPR-Course-Project repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.

Can I use the SAPR-Course-Project design in my own project?

The repository has no license, so all rights stay with Garun-mp4. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SAPR-Course-Project without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards