Guitar pedal

GasimovDev·guitar-pedal·hardware/pedal.kicad_pcb

Guitar pedal PCB layout, top view — open source STM32 board by GasimovDev

About the Guitar pedal PCB

Guitar pedal is an open source STM32 PCB design by GasimovDev, published on GitHub. It is a 2-layer board measuring 85 × 76 mm, with 94 components from 39 distinct parts.

Its main chip is the WeAct BlackPill V3.0 STM32F411CEU6 (25 MHz HSE), from the STM32 family. Other key parts include the L78M05CDT-TR, AP2112K-3.3TRG1, OPA1678IDR, PCM1808PWR and PCM5102APWR. By type, the board carries 41 capacitors, 30 resistors, 6 ICs, 5 connectors, 5 diodes and 1 inductor.

It belongs with the audio designs in this gallery.

From the project

A digital guitar pedal. Guitar in, an STM32 microcontroller runs three effects (overdrive, then tremolo, then delay), and the sound comes out to your amp. It has six knobs, three footswitches and three LEDs.

A digital guitar pedal. Guitar in, an STM32 microcontroller runs three effects (overdrive, then tremolo, then delay), and the sound comes out to your amp. It has six knobs, three footswitches and three LEDs.

What you do next is in the build guide. It covers only the jobs that need your hands: ordering, soldering, flashing, measuring and drilling.

1. Nothing has been built or powered yet. The firmware has not run on hardware, and the board has not been made. 2. LCSC part numbers are blank in the BOM. I can't reach the JLCPCB parts catalogue from here, so you pick each part in their BOM tool.…

Main components on the Guitar pedal

L78M05CDT-TRAP2112K-3.3TRG1OPA1678IDRPCM1808PWRPCM5102APWRWeAct BlackPill V3.0 STM32F411CEU6 (25 MHz HSE)

Guitar pedal bill of materials (BOM)

94 components, 39 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
L78M05CDT-TR
L78M05
U1
1
AP2112K-3.3TRG1
AP2112K-3.3
U2
1
OPA1678IDR
OPA1678
U3
1
PCM1808PWR
PCM1808
U4
1
PCM5102APWR
PCM5102A
U5
1
WeAct BlackPill V3.0 STM32F411CEU6 (25 MHz HSE)
WeAct BlackPill STM32F411CEU6
U6
1
2.54mm header 1x2
9V_DC_IN
J1
1
2.54mm header 1x2
GUITAR_IN
J2
1
2.54mm header 1x2
OUT
J3
1
2.54mm header 1x3
UART
J5
1
2.54mm header 1x4
FOOTSWITCHES
J6
1
Alpha RD901F-40 9mm B10K linear
B10k DRIVE
RV1
1
Alpha RD901F-40 9mm B10K linear
B10k TONE
RV2
1
Alpha RD901F-40 9mm B10K linear
B10k RATE
RV3
1
Alpha RD901F-40 9mm B10K linear
B10k DEPTH
RV4
1
Alpha RD901F-40 9mm B10K linear
B10k TIME
RV5
1
Alpha RD901F-40 9mm B10K linear
B10k REPEATS
RV6
1
SS34
D1
1
SS14
D2
1
3mm red LED, diffused
LED OD red
D3
Show 19 more
QtyPartRefs
1
3mm yellow LED, diffused
LED TREM yellow
D4
1
3mm green LED, diffused
LED DELAY green
D5
1
BLM21PG601SN1D
600R@100MHz
FB1
1
100uF 25V SMD electrolytic 6.3x7.7
100uF 25V
C1
19
0805 100nF X7R
100nF
C2, C5, C9, C17, C19, C20, C25, C26 +11
4
0805 1uF X7R
1uF
C3, C6, C15, C23
10
0805 10uF X7R
10uF
C4, C7, C12, C14, C16, C18, C24, C29 +2
1
47uF 25V SMD electrolytic 6.3x5.4
47uF 25V
C8
2
0805 100pF C0G
100pF
C10, C11
2
0805 2.2nF C0G
2.2nF
C13, C28
2
0805 2.2uF X7R
2.2uF
C21, C22
5
0805 10k 1%
10k
R1, R2, R7, R9, R12
2
0805 1M 1%
1M
R3, R5
12
0805 1k 1%
1k
R4, R8, R14, R19, R20, R21, R22, R23 +4
1
0805 5.1k 1%
5.1k
R6
4
0805 470 1%
470
R10, R28, R29, R30
1
0805 22k 1%
22k
R11
1
0805 100k 1%
100k
R13
4
0805 33 1%
33
R15, R16, R17, R18

Guitar pedal design files

The KiCad project lives in the GasimovDev/guitar-pedal repository on GitHub; these links point at the commit this page was built from.

Guitar pedal: common questions

What microcontroller does the Guitar pedal use?

The Guitar pedal is built around the WeAct BlackPill V3.0 STM32F411CEU6 (25 MHz HSE), from the STM32 family.

How big is the Guitar pedal PCB?

The Guitar pedal measures 85 × 76 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Guitar pedal?

94 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Guitar pedal design files?

From the GasimovDev/guitar-pedal repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Guitar pedal design in my own project?

The repository has no license, so all rights stay with GasimovDev. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Guitar pedal without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards