9 open source boards using the OPA1678IDR

Real designs built with the OPA1678IDR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the OPA1678IDR

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the OPA1678IDR connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT_A_1 pin has a series resistor on 8 of 8 designs, most often 100 kΩ (then 10 kΩ).
  • The - pins have a series resistor on 8 of 8 designs, most often 10 kΩ (then 100 kΩ).
  • The - pins have a series capacitor on 7 of 8 designs, most often 100 pF (then 33 pF).
  • The V+ pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF).
OUT_A_1pin 1Connected to: Signal 100%
  • Series resistor on 100% · 100 kΩ (3), 10 kΩ (3), 100 Ω (3)
  • Series capacitor on 63% · 100 pF (2), 33 pF (1), 330 pF (1)
-pin 2, 6Connected to: Signal 94%
  • Series resistor on 100% · 10 kΩ (8), 100 kΩ (3), 56 kΩ (2)
  • Series capacitor on 88% · 100 pF (3), 33 pF (3), 220 nF (2)
+pin 3, 5Connected to: Signal 88%
  • Capacitor to GND on 63% · 100 pF (3), 1 µF (1), 330 pF (1)
  • Series resistor on 63% · 10 kΩ (4), 100 kΩ (2), 1 kΩ (2)
V-pin 4Connected to: GND 63% · -5V 38%
OUT_B_7pin 7Connected to: Signal 88%
  • Series resistor on 75% · 10 kΩ (3), 47 kΩ (1), 68 kΩ (1)
  • Series capacitor on 50% · 33 pF (2), 100 pF (1), 10 µF (1)
V+pin 8Connected to: 5V 100%
  • Decoupling capacitor on 88% · 100 nF (7), 10 µF (2), 47 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-G by freeDSP, Hw mod dwarf by mod-audio, Preamp by bengineer91 and PREAMP2311 by dmsd-lab.

The OPA1678IDR in open source designs

The gallery holds 9 open source boards using the OPA1678IDR from 8 GitHub repositories; a typical one measures about 160 × 90 mm and carries around 209 components.

56% use four copper layers or more, and 33% carry an open source license.

The most starred is FreeDSP-G by freeDSP.

Parts used alongside the OPA1678IDR

Microcontrollers on boards using the OPA1678IDR

What boards using the OPA1678IDR are built for

OPA1678IDR: common questions

Where can I find a OPA1678IDR reference design?

Each of the 9 boards on this page is a real design using the OPA1678IDR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the OPA1678IDR OUT_A_1 pin?

The OUT_A_1 pin has a series resistor on 8 of 8 designs, most often 100 kΩ (then 10 kΩ). Counted from the KiCad layouts of 8 open source designs using the OPA1678IDR.

What resistor goes on the OPA1678IDR - pin?

The - pins have a series resistor on 8 of 8 designs, most often 10 kΩ (then 100 kΩ). Counted from the KiCad layouts of 8 open source designs using the OPA1678IDR.

What decoupling capacitors do designs use on the OPA1678IDR V+ pin?

The V+ pin has a decoupling capacitor on 7 of 8 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 8 open source designs using the OPA1678IDR.

Which microcontrollers do boards using the OPA1678IDR use?

Most are built on STM32 (2).

How big is a typical board using the OPA1678IDR?

The median is 160 × 90 mm, and 44% are two-layer designs.

What is the most popular open source board using the OPA1678IDR?

By GitHub stars, FreeDSP-G by freeDSP, with 6 stars.

Can I simulate one of these boards using the OPA1678IDR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part