42 open source boards using the PCM5102APWR
Real designs built with the PCM5102APWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Open motorcycle intercom
d3vv3
100 × 50 mm116 parts4LMIT68ESP32
AiO-i2s-DAC
martinroger
58.8 × 55.8 mm86 parts2LMIT23FreeDSP-G
freeDSP
170 × 101 mm367 parts4LCC0-1.06FreeDSP Classic SMD AB plus-II
CyberPit
134 × 109.5 mm225 parts2LNo license6Preamp
bengineer91
160 × 100 mm358 parts4LNo license2RP2040/RP2350
PortaRe0
0Re0-8192
135 × 77 mm349 parts6LNo license2ESP32
SF 01 Compute Board
sandgum
128 × 128 mm332 parts4LNo license2- schematic only · 40 partsESP32
Moto Audio
bacnbit
40 partsNo license2 ESP32
Class d speaker project
iliyanchou
97 × 97.5 mm93 parts2LNo license1Pulsephone main board
pulseopen
70.5 × 128.5 mm70 parts4LGPL-3.01FPGA
ICE40UP5K to PCM5102A, I2S out
sabas0ba
100 × 84 mm33 parts2LApache-2.01STM32
SIGMAGE
allogic
120 × 170 mm725 parts6LMIT0ESP32
RX8-7(Finished BeforeESPChange)
bradport02
165.3 × 123.7 mm407 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm298 parts4LNo license0RP2040/RP2350
PCE colorlight carrier
supermomo31
180 × 160 mm253 parts4LNo license0ESP32
Kicad foxhunt batterytest
gx1400
191.5 × 121.8 mm253 parts4LNo license0ESP32
Pajoniiir-M1
dvucinozd
175.6 × 220.1 mm223 parts4LNo license0Raspberry Pi
HomeDeck
Kilan777
130 × 105 mm220 parts4LNo license0FPGA
Courant
KrasForge
160 × 100 mm180 parts6LMIT0ESP32
Prod board
family-mruby
90 × 70 mm125 parts4LCERN-OHL-S-2.00ESP32
Poket
kaorii-ako
80 × 54 mm100 parts4LMIT0STM32
Guitar pedal
GasimovDev
85 × 76 mm94 parts2LNo license0NXP
Audio board
stefvanson
100 × 100 mm77 parts2LNo license0ESP32
GameBoy-Mp3-Plater
amkhan2009
52.8 × 68.5 mm40 parts2LMIT0ESP32
DuckyDK-MTR-1
DuckyBoi-XD
90.7 × 70 mm33 parts2LGPL-3.00- schematic only · 109 partsSTM32
Fm usb mpx tuner
LyonelB
109 partsCERN-OHL-S-2.00 ESP32
RX8-7
bradport02
165.3 × 123.7 mm401 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0FPGA
Courant.before colored actual models 20260918T190457
KrasForge
160 × 100 mm180 parts6LMIT0ESP32
Dev board r2
family-mruby
90 × 70 mm109 parts4LCERN-OHL-S-2.00ESP32
RX8-7(WithoutOpAmps)
bradport02
165.3 × 123.7 mm388 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0ESP32
RX8-7(STM CENTRE)
bradport02
165.3 × 123.7 mm384 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0NXP
Quad Preamp and 4-Channel Ambisonic Recorder
jdg511
138 × 114 mm242 parts4LNo license0
How designs wire the PCM5102APWR
Read from the KiCad layouts of 24 open source designs, one per repository: what each pin of the PCM5102APWR connects to, and the resistors, capacitors and other passives placed on it.
- The CAPP pin has a series capacitor on 24 of 24 designs, most often 2.2 µF (then 10 µF).
- The CAPM pin has a series capacitor on 24 of 24 designs, most often 2.2 µF (then 10 µF).
- The VNEG pin has a capacitor to GND on 23 of 24 designs, most often 2.2 µF (then 10 µF).
- The LDOO pin has a capacitor to GND on 22 of 24 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CPVDDpin 1 | Connected to: 3.3V 75% · a signal 25% |
|
| CAPPpin 2 | Connected to: Signal 100% |
|
| CPGNDpin 3 | Connected to: GND 96% | — |
| CAPMpin 4 | Connected to: Signal 100% |
|
| VNEGpin 5 | Connected to: Signal 100% |
|
| OUTLpin 6 | Connected to: Signal 100% |
|
| OUTRpin 7 | Connected to: Signal 96% |
|
| AVDDpin 8 | Connected to: 3.3V 79% · a signal 21% |
|
| AGNDpin 9 | Connected to: GND 100% | — |
| DEMPpin 10 | Connected to: GND 92% | — |
| FLTpin 11 | Connected to: GND 88% | — |
| BCKpin 13 | Connected to: The microcontroller 38% |
|
| DINpin 14 | Connected to: The microcontroller 42% |
|
| LRCKpin 15 | Connected to: The microcontroller 38% |
|
| FMTpin 16 | Connected to: GND 96% | — |
| LDOOpin 18 | Connected to: Signal 88% |
|
| DGNDpin 19 | Connected to: GND 100% | — |
| DVDDpin 20 | Connected to: 3.3V 83% · a signal 17% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Open motorcycle intercom by d3vv3, AiO-i2s-DAC by martinroger, FreeDSP Classic SMD AB plus-II by CyberPit and FreeDSP-G by freeDSP.
The PCM5102APWR in open source designs
The gallery holds 42 open source boards using the PCM5102APWR from 26 GitHub repositories; a typical one measures about 138 × 114 mm and carries around 222 components.
75% use four copper layers or more, and 33% carry an open source license.
The most starred is Open motorcycle intercom by d3vv3.
Parts used alongside the PCM5102APWR
Microcontrollers on boards using the PCM5102APWR
What boards using the PCM5102APWR are built for
PCM5102APWR: common questions
Where can I find a PCM5102APWR reference design?
Each of the 42 boards on this page is a real design using the PCM5102APWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the PCM5102APWR CAPP pin connected?
The CAPP pin has a series capacitor on 24 of 24 designs, most often 2.2 µF (then 10 µF). Counted from the KiCad layouts of 24 open source designs using the PCM5102APWR.
How is the PCM5102APWR CAPM pin connected?
The CAPM pin has a series capacitor on 24 of 24 designs, most often 2.2 µF (then 10 µF). Counted from the KiCad layouts of 24 open source designs using the PCM5102APWR.
How is the PCM5102APWR VNEG pin connected?
The VNEG pin has a capacitor to GND on 23 of 24 designs, most often 2.2 µF (then 10 µF). Counted from the KiCad layouts of 24 open source designs using the PCM5102APWR.
What parts are used alongside the PCM5102APWR?
The USBLC6-2SC6, AMS1117-3.3, AP2112K-3.3TRG1, OPA1678IDR and TPA6132A2RTER appear in the most repositories here.
Which microcontrollers do boards using the PCM5102APWR use?
Most are built on ESP32 (16), NXP (13), FPGA (3) and STM32 (3).
How big is a typical board using the PCM5102APWR?
The median is 138 × 114 mm, and 25% are two-layer designs.
What is the most popular open source board using the PCM5102APWR?
By GitHub stars, Open motorcycle intercom by d3vv3, with 68 stars.
Can I simulate one of these boards using the PCM5102APWR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.