24 open source boards using the PCM1808PWR

Real designs built with the PCM1808PWR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

24 boardsClear filters|Most starred

How designs wire the PCM1808PWR

Read from the KiCad layouts of 17 open source designs, one per repository: what each pin of the PCM1808PWR connects to, and the resistors, capacitors and other passives placed on it.

  • The VREF_1 pin has a capacitor to GND on 16 of 17 designs, most often 10 µF (then 100 nF).
  • The VCC_3 pin has a decoupling capacitor on 14 of 17 designs, most often 100 nF (then 10 µF).
  • The VDD_4 pin has a decoupling capacitor on 13 of 17 designs, most often 100 nF (then 10 µF).
  • The SCKI_6 pin has a series resistor on 10 of 17 designs, most often 33 Ω (then 27 Ω).
VREF_1pin 1Connected to: Signal 76% · VREF0 18%
  • Capacitor to GND on 94% · 10 µF (15), 100 nF (13)
AGND_2pin 2Connected to: GND 94%
VCC_3pin 3Connected to: 5V 59% · a signal 41%
  • Decoupling capacitor on 82% · 100 nF (14), 10 µF (10), 2.2 µF (2)
VDD_4pin 4Connected to: 3.3V 88%
  • Decoupling capacitor on 76% · 100 nF (13), 10 µF (9), 2.2 µF (1)
DGND_5pin 5Connected to: GND 94%
SCKI_6pin 6Connected to: A connector 35%
  • Series resistor on 59% · 33 Ω (5), 27 Ω (2), 0 Ω (2)
LRCK_7pin 7Connected to: A connector 29%, the microcontroller 24%
  • Series resistor on 47% · 33 Ω (4), 27 Ω (2), 51 Ω (1)
BCK_8pin 8Connected to: A connector 29%, the microcontroller 24%
  • Series resistor on 47% · 33 Ω (4), 27 Ω (2), 51 Ω (1)
VINL_13pin 13Connected to: Signal 88%
  • Series capacitor on 53% · 1 µF (6), 10 µF (3), 4.7 µF (1)
  • Series resistor on 47% · 470 Ω (5), 100 Ω (2), 10 kΩ (1)
VINR_14pin 14Connected to: Signal 88%
  • Series resistor on 47% · 470 Ω (5), 100 Ω (2), 10 kΩ (1)
  • Capacitor to GND on 41% · 2.2 nF (5), 10 nF (1), 1 µF (1)
  • Series capacitor on 41% · 1 µF (6), 4.7 µF (1), 10 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 4HPicoDSP by rheslip, Legacy av in by marqs85, Simplecodec3 by cyberomusubi and Expansion board v4 by naizhao.

The PCM1808PWR in open source designs

The gallery holds 24 open source boards using the PCM1808PWR from 17 GitHub repositories; a typical one measures about 96.3 × 78.3 mm and carries around 183 components.

63% use four copper layers or more, and 21% carry an open source license.

The most starred is 4HPicoDSP by rheslip.

Microcontrollers on boards using the PCM1808PWR

PCM1808PWR: common questions

Where can I find a PCM1808PWR reference design?

Each of the 24 boards on this page is a real design using the PCM1808PWR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the PCM1808PWR VREF_1 pin connected?

The VREF_1 pin has a capacitor to GND on 16 of 17 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 17 open source designs using the PCM1808PWR.

What decoupling capacitors do designs use on the PCM1808PWR VCC_3 pin?

The VCC_3 pin has a decoupling capacitor on 14 of 17 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 17 open source designs using the PCM1808PWR.

What decoupling capacitors do designs use on the PCM1808PWR VDD_4 pin?

The VDD_4 pin has a decoupling capacitor on 13 of 17 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 17 open source designs using the PCM1808PWR.

What parts are used alongside the PCM1808PWR?

The PCM5102A, Si5351A-B-GT, AP2112K-3.3TRG1, MS5351M and Pico appear in the most repositories here.

Which microcontrollers do boards using the PCM1808PWR use?

Most are built on RP2040/RP2350 (11), ESP32 (1), FPGA (1) and STM32 (1).

How big is a typical board using the PCM1808PWR?

The median is 96.3 × 78.3 mm, and 38% are two-layer designs.

What is the most popular open source board using the PCM1808PWR?

By GitHub stars, 4HPicoDSP by rheslip, with 83 stars.

Can I simulate one of these boards using the PCM1808PWR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part