HardLabs

GBABreakout

gbaHD·GBAHD-Shield·breakout_GBASP/GBABreakout.kicad_pcb

GBABreakout PCB layout, top view — open source board by gbaHD

About the GBABreakout PCB

GBABreakout is an open source PCB design by gbaHD, published on GitHub under the CC-BY-NC-4.0 license. It is a 2-layer board measuring 19.9 × 10 mm, with 17 components from 17 distinct parts.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

It has the following features. - Connects via female headers to the Edge board (shield) - Has a FFC 40 pin connector for OGBA LCD connector. Need Type-B Cable (Reverse) vvv=======^^^ - Has a FFC 32 pin connector for OGBA LCD connector. Need Type-B Cable (Reverse) vvv=======^^^ -

It has the following features. - Connects via female headers to the Edge board (shield) - Has a FFC 40 pin connector for OGBA LCD connector. Need Type-B Cable (Reverse) vvv=======^^^ - Has a FFC 32 pin connector for OGBA LCD connector. Need Type-B Cable (Reverse) vvv=======^^^ - Has a FFC 34 pin connector for GBA-SP LCD connector. Need Type-A Cable (Direct) vvv=======vvv - Has a FFC 16 pin connector for controls with a wire up board. Need Type-B Cable (Reverse) vvv=======^^^ - Has a ATMEGA328p / ATMEGA168p / ATMEGA88p for using a SNES connector to control the GBA. - Has a high-side switch for…

GBABreakout, from the project README
From the project README

GBABreakout bill of materials (BOM)

17 components, 17 distinct parts.

QtyPartRefs
1
Conn_01x16
J1
1
VCC
J2
1
TP6
J3
1
TP7
J4
1
TP5
J5
1
TP4
J6
1
TP0
J7
1
TP1
J8
1
TP9
J9
1
TP8
J10
1
TP3
J11
1
TP2
J12
1
S02
J13
1
S01
J14
1
CK1
J15
1
EX1
J16
1
GND
J17

GBABreakout design files

The KiCad project lives in the gbaHD/GBAHD-Shield repository on GitHub; these links point at the commit this page was built from.

GBABreakout: common questions

How big is the GBABreakout PCB?

The GBABreakout measures 19.9 × 10 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the GBABreakout?

17 components, from 17 distinct parts. The full bill of materials is listed on this page.

Where can I download the GBABreakout design files?

From the gbaHD/GBAHD-Shield repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the GBABreakout design in my own project?

It is published under CC-BY-NC-4.0, which limits how it may be reused; read the license before building on it.

More boards in GBAHD-Shield

Similar boards