GB-BRK-SLOT-A
About the GB-BRK-SLOT-A PCB
GB-BRK-SLOT-A is an open source PCB design by Gekkio, published on GitHub under the CC-BY-4.0 license. It is a 2-layer board measuring 81 × 80 mm, with 20 components from 15 distinct parts.
By type, the board carries 7 resistors, 6 diodes, 4 connectors, 2 capacitors and 1 jumper.
It belongs with the retro computing designs in this gallery.
From the project
Game Boy -related custom hardware by gekkio
gekkio-kicad-libs kicad-footprints * kicad-symbols
All the designs in this repository are licensed very liberally under CC BY 4.0, so you can modify and/or sell them commercially if you want. There's just one requirement: attribution
Basically it just means this: don't remove the original creator's name from the design. Here's the full description about it in CC BY 4.0
GB-BRK-SLOT-A bill of materials (BOM)
20 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 504050-0591 Conn_02x16_Odd_Even Molex | PinSocket_2x16_P2.54mm_Vertical | J1 |
| 1 | Conn_02x16_Odd_Even Hirose | PinHeader_2x16_P2.54mm_Vertical | J2 |
| 1 | GameBoy_Cartridge | GameBoy_Cartridge_DMG_1x32_P1.50mm_Socket_Horizontal | J3 |
| 1 | Conn_02x02_Odd_Even | PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | Jumper_NC_Small | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | BAT54CLT3G LED OnSemi | LED_0603_1608Metric | D1 |
| 1 | 150060SS75000 LED Wurth Electronics | LED_0603_1608Metric | D2 |
| 2 | 150060YS75000 LED Wurth Electronics | LED_0603_1608Metric | D3, D4 |
| 2 | LED | LED_0603_1608Metric | D5, D6 |
| 1 | EMK212BJ475MD-T 10uF Taiyo Yuden | C_1206_3216Metric | C1 |
| 1 | C0603C474K4PACTU 0.1uF KEMET | C_0603_1608Metric | C2 |
| 3 | RC0603JR-133K3L 3.3k Yageo | R_0603_1608Metric | R1, R4, R5 |
| 2 | RC0603FR-0710KL 3.3k Yageo | R_0603_1608Metric | R2, R3 |
| 1 | RC0603FR-10470RL 3.3k Yageo | R_0603_1608Metric | R6 |
| 1 | RC0603FR-0710KL 0R Yageo | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R7 |
GB-BRK-SLOT-A design files
The KiCad project lives in the Gekkio/gb-hardware repository on GitHub; these links point at the commit this page was built from.
GB-BRK-SLOT-A: common questions
How big is the GB-BRK-SLOT-A PCB?
The GB-BRK-SLOT-A measures 81 × 80 mm, has 2 copper layers and is 1.2 mm thick.
How many components are on the GB-BRK-SLOT-A?
20 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the GB-BRK-SLOT-A design files?
From the Gekkio/gb-hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the GB-BRK-SLOT-A design in my own project?
Yes, under the terms of its CC-BY-4.0 license, which Gekkio chose for the repository.
More boards in gb-hardware
PICGB-BENCH-G1
100 × 100 mm98 parts4LCC-BY-4.0376
PICGB-LIVE32
51.4 × 61 mm46 parts4LCC-BY-4.0376
PICGB-MBCTEST
51.4 × 61 mm32 parts2LCC-BY-4.0376
PICGB-CARTPP-DIY
100 × 100 mm22 parts2LCC-BY-4.0376
GB-BRK-SLOT-B
81 × 80 mm20 parts2LCC-BY-4.0376
PICGB-CARTPP-XC
80 × 55 mm19 parts2LCC-BY-4.0376
PICGB-CART256K-A
51.4 × 61 mm17 parts2LCC-BY-4.0376
GB-BRK-CPU-G2
80 × 80 mm12 parts2LCC-BY-4.0376
GB-BRK-CPU-G1
80 × 80 mm12 parts2LCC-BY-4.0376
GB-CART32K-A
51.4 × 61 mm7 parts2LCC-BY-4.0376
GB-BRK-CART
51.4 × 61 mm4 parts2LCC-BY-4.0376
Similar boards
OpenTendo
Redherring32
196.3 × 118.7 mm93 parts2LTAPR-OHL-1.0850
24pin flex interposer
Wren6991
29 × 32 mm3 parts2LNo license508
Sram dev board
50 × 50 mm12 parts2LNo license508
Rosco m68k
rosco-m68k
160 × 100 mm74 partsBSD-3-Clause199
TICK
jasonsbeer
37.3 × 27 mm10 parts2LGPL-3.0198
Amiga 2000 EATX
304.8 × 330.2 mm599 parts4LGPL-3.0198