HardLabs

WaveWise Submersible

GenerateNU·WaveWise·production/wavewise-ecad/WaveWise_Submersible_FINAL/WaveWise_Submersible.kicad_pcb

WaveWise Submersible PCB layout, top view — open source AVR/Arduino board by GenerateNU

About the WaveWise Submersible PCB

WaveWise Submersible is an open source AVR/Arduino PCB design by GenerateNU, published on GitHub. It is a 4-layer board measuring 136.8 × 50.8 mm, with 70 components from 31 distinct parts.

Its main chip is the ATMEGA328PB-ANR, from the AVR/Arduino family. Other key parts include the KP234XTMA1, SI8600AC-B-ISR, EZO_pH_Circuit, EZO_Conductivity_Circuit and TLV2462CP. By type, the board carries 25 resistors, 17 capacitors, 11 connectors, 8 ICs, 4 diodes and 2 modules.

Main components on the WaveWise Submersible

ATMEGA328PB-ANRKP234XTMA1SI8600AC-B-ISREZO_pH_CircuitEZO_Conductivity_CircuitTLV2462CPFT232RL-REEL

WaveWise Submersible bill of materials (BOM)

70 components, 31 distinct parts.

QtyPartRefs
1
ATMEGA328PB-ANR
U1
1
KP234XTMA1
U2
2
SI8600AC-B-ISR
U3, U5
1
EZO_pH_Circuit
U4
1
EZO_Conductivity_Circuit
U6
1
TLV2462CP
U7
1
FT232RL-REEL
U8
2
MNMOS
M1, M2
1
AS-16.000-20-SMD-TR
Y1
3
SMA_CONNECTOR
J1, J2, J5
1
Screw_Terminal_01x04
J3
5
Screw_Terminal_01x03
J4, J7, J8, J10, J11
1
USB_B_Micro
J6
1
Screw_Terminal_01x02
J9
2
RFM-0505S
PS1, PS2
1
D_Photo
D1
1
1N5822
D2
2
LED_S
D3, D4
4
1u/10V
C1, C4, C5, C6
2
100nF/10V
C2, C3
Show 11 more
QtyPartRefs
6
100n/10V
C7, C8, C12, C14, C18, C19
1
4.7u/10V
C10
2
0.1uF/10V
C13, C15
2
22pF/10V
C16, C17
5
1M
R1, R3, R10, R11, R19
10
10k
R2, R4, R5, R7, R8, R9, R12, R13 +2
1
22k
R6
5
1k
R14, R15, R20, R21, R22
1
0
R18
1
3.3k
R23
2
R
R24, R25

WaveWise Submersible design files

The KiCad project lives in the GenerateNU/WaveWise repository on GitHub; these links point at the commit this page was built from.

WaveWise Submersible: common questions

What microcontroller does the WaveWise Submersible use?

The WaveWise Submersible is built around the ATMEGA328PB-ANR, from the AVR/Arduino family.

How big is the WaveWise Submersible PCB?

The WaveWise Submersible measures 136.8 × 50.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the WaveWise Submersible?

70 components, from 31 distinct parts. The full bill of materials is listed on this page.

Where can I download the WaveWise Submersible design files?

From the GenerateNU/WaveWise repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the WaveWise Submersible design in my own project?

The repository has no license, so all rights stay with GenerateNU. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the WaveWise Submersible without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in WaveWise

Similar boards