4 open source boards using the KP234XTMA1
Real designs built with the KP234XTMA1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
DropBear
speeduino
116.1 × 98 mm196 parts2LNo license282AVR/Arduino
UA4C-vC5
MIsfitMatty
100 × 99.8 mm213 parts2LGPL-2.00AVR/Arduino
WaveWise Submersible
GenerateNU
136.8 × 50.8 mm70 parts4LNo license0RP2040/RP2350
WaveWise Submersible
GenerateNU
114.3 × 63.5 mm66 parts4LNo license0
The KP234XTMA1 in open source designs
The gallery holds 4 open source boards using the KP234XTMA1 from 4 GitHub repositories; a typical one measures about 115.2 × 80.8 mm and carries around 133 components.
50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is DropBear by speeduino.
Parts used alongside the KP234XTMA1
Microcontrollers on boards using the KP234XTMA1
What boards using the KP234XTMA1 are built for
KP234XTMA1: common questions
Where can I find a KP234XTMA1 reference design?
Each of the 4 boards on this page is a real design using the KP234XTMA1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the KP234XTMA1?
The EZO_Conductivity_Circuit, EZO_pH_Circuit and SI8600AC-B-ISR appear in the most repositories here.
Which microcontrollers do boards using the KP234XTMA1 use?
Most are built on AVR/Arduino (2), ESP32 (1) and RP2040/RP2350 (1).
How big is a typical board using the KP234XTMA1?
The median is 115.2 × 80.8 mm, and 50% are two-layer designs.
What is the most popular open source board using the KP234XTMA1?
By GitHub stars, DropBear by speeduino, with 282 stars.
Can I simulate one of these boards using the KP234XTMA1 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.