Usb buck converter
GeoffWilliams·usb_buck_converter
About the Usb buck converter PCB
Usb buck converter is an open source PCB design by GeoffWilliams, published on GitHub. It is a 2-layer board measuring 76.5 × 57 mm, with 10 components from 9 distinct parts.
Other key parts include the LM2596S-3.3. By type, the board carries 2 connectors, 2 capacitors, 2 resistors, 1 IC, 1 test point and 1 diode.
It belongs with the power & battery designs in this gallery.
From the project
USB powered buck converter 5V -> 3.3V
Main components on the Usb buck converter
Usb buck converter bill of materials (BOM)
10 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM2596S-3.3 | TO-263-5_TabPin3 | U1 |
| 1 | C41417359 3.3V Out | PinHeader_1x02_P2.54mm_Vertical_SMD_Pin1Left | J2 |
| 1 | C2927026 USB-C Power | USB-C-SMD_USB-TYPE-C-006 | J3 |
| 1 | TESTPOINT_1 5V Test | TestPoint_2Pads_Pitch2.54mm_Drill0.8mm | TP1 |
| 1 | SS33 | D_SMA | D1 |
| 1 | SMSD1306-330MT | SMDRI127‑330MT | L1 |
| 1 | 680UF 680uF | CAP_EEEFK1J681AM | C1 |
| 1 | 220UF 220uF | CAPMP7343X430N | C2 |
| 2 | 5.1K 5.1k | R_0603_1608Metric | R1, R2 |
Usb buck converter design files
The KiCad project lives in the GeoffWilliams/usb_buck_converter repository on GitHub; these links point at the commit this page was built from.
- Layoutbuckconverter.kicad_pcb
- Schematicbuckconverter.kicad_sch
- BOMproduction/bom_holes.csv
Usb buck converter: common questions
How big is the Usb buck converter PCB?
The Usb buck converter measures 76.5 × 57 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Usb buck converter?
10 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Usb buck converter design files?
From the GeoffWilliams/usb_buck_converter repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Usb buck converter design in my own project?
The repository has no license, so all rights stay with GeoffWilliams. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k