FPAA Starter Board
About the FPAA Starter Board
FPAA Starter Board is an open source PCB design by gfm16617, published on GitHub. It is a 4-layer board measuring 49.3 × 33 mm, with 24 components from 18 distinct parts.
Other key parts include the NCP1117IST33T3G. By type, the board carries 11 capacitors, 10 connectors, 1 IC, 1 crystal and 1 resistor.
Main components on the FPAA Starter Board
FPAA Starter Board bill of materials (BOM)
24 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCP1117IST33T3G OTC24000 | QFN-44-1EP_7x7mm_P0.5mm_EP5.15x5.15mm | U1 |
| 1 | 12SMX-B | Crystal_SMD_7050-4Pin_7.0x5.0mm | Y1 |
| 1 | CONN_01X02 Power Connector | PinHeader_1x02_P2.54mm_Vertical | J1 |
| 1 | 10118194-0001LF SPI Connector | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | CONN_01X15 IO1 Connector | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | CONN_01X15 IO2 Connector | PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | IO5 Connector | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | IO6 Connector | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | IO3 Connector | PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | IO4 Connector | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | IO7 Connector | PinHeader_1x02_P2.54mm_Vertical | J9 |
| 1 | ACLK Connector | PinHeader_1x02_P2.54mm_Vertical | J10 |
| 2 | 04024D106MAT2A 100nF | C_0603_1608Metric | C1, C2 |
| 4 | 0402YC104KAT2A 100nF | C_0603_1608Metric | C3, C4, C6, C8 |
| 3 | 0402YC104KAT2A 10nF | C_0603_1608Metric | C5, C7, C9 |
| 1 | 100nF | C_0603_1608Metric | C10 |
| 1 | 0402YC104KAT2A 100pF | C_0603_1608Metric | C11 |
| 1 | CRT0402-BY-1001GLF 10k | R_0603_1608Metric | R1 |
FPAA Starter Board design files
The KiCad project lives in the gfm16617/EngrEDU_Website repository on GitHub; these links point at the commit this page was built from.
FPAA Starter Board: common questions
How big is the FPAA Starter Board?
The FPAA Starter Board measures 49.3 × 33 mm, has 4 copper layers and is 4.69 mm thick.
How many components are on the FPAA Starter Board?
24 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the FPAA Starter Board design files?
From the gfm16617/EngrEDU_Website repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the FPAA Starter Board design in my own project?
The repository has no license, so all rights stay with gfm16617. Use it as a reference, and ask the author before reusing the design.
More boards in EngrEDU_Website
STM322026 STM32H7 FPAA v1
68.6 × 53.3 mm91 parts4LNo license3
RP2040/RP23502026 ESP32 FPAA v3
68.6 × 53.3 mm82 parts4LNo license3
RP2040/RP23502026 12 2Wheel Balance Robot v1
68.6 × 53.4 mm56 parts2LNo license3
RP2040/RP2350VCO PCB B REV2
81.3 × 100 mm52 parts2LNo license3
RP2040/RP2350Levitation Analog v1
90 × 55 mm44 parts2LNo license3
Daisy Seed POD v1
90 × 60 mm44 parts2LNo license3
Uno Shield DSP Class v1
83.8 × 53.3 mm44 parts2LNo license3
RP2040/RP23502024 11 STM32F303 DaisyShape v1 3
61 × 22.5 mm31 parts4LNo license3
RP2040/RP2350AudioMixer Duo LBB
100 × 85.3 mm27 parts2LNo license3
2024 ECG FinalProject
72.3 × 39.6 mm21 parts2LNo license3
RP2040/RP2350AudioMixer LBB
95 × 60 mm21 parts2LNo license3