Daisy Seed POD v1
About the Daisy Seed POD v1 PCB
Daisy Seed POD v1 is an open source PCB design by gfm16617, published on GitHub. It is a 2-layer board measuring 90 × 60 mm, with 44 components from 29 distinct parts.
Other key parts include the SSM-120-L-SV, PEC11J-9220F-H0015, H11L1SR2M and Electrosmith_Daisy_Seed_Rev4. By type, the board carries 18 resistors, 7 connectors, 7 capacitors, 3 ICs, 3 diodes and 2 switches.
Main components on the Daisy Seed POD v1
Daisy Seed POD v1 bill of materials (BOM)
44 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SSM-120-L-SV TPA6110A2DGN Samtec | HVSSOP-8-1EP_3x3mm_P0.65mm_EP1.57x1.89mm | U1 |
| 1 | PEC11J-9220F-H0015 ROTARY_ENCODER | PEC11J9220FH0015 | U2 |
| 1 | H11L1SR2M | H11L1SR2M | U3 |
| 1 | Electrosmith_Daisy_Seed_Rev4 | Electrosmith_Daisy_Seed | A1 |
| 1 | SJ2-35863B1-SMT-TR MIDI_JACK_CONN CUI | SJ235863B1SMTTR | J1 |
| 1 | SJ2-35863B1-SMT-TR AUDIO_IN_JACK_CONN CUI | SJ235863B1SMTTR | J2 |
| 1 | SJ2-35863B1-SMT-TR AUDIO_OUT_JACK_CONN CUI | SJ235863B1SMTTR | J3 |
| 1 | SJ2-35863B1-SMT-TR HEADPHONES_JACK_CONN CUI | SJ235863B1SMTTR | J4 |
| 2 | OLED_CONN | PinSocket_1x04_P2.54mm_Vertical | J5, J7 |
| 1 | USB_C_Receptacle_USB2.0_14P Same Sky | USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J6 |
| 2 | 100k | Potentiometer_Bourns_3386P_Vertical | RV3, RV4 |
| 1 | TACT_SW_1 | SW_SKRPACE010 | SW1 |
| 1 | TACT_SW_2 | SW_SKRPACE010 | SW2 |
| 1 | RK10J12R0A0B VOLUME_POT | RK10J12R0A0B | VR1 |
| 1 | SD103AWS | SOD2513X120N | D1 |
| 2 | CLVBA-FKA-CAEDH8BBB7A363 | SOL150P350X210-4N | D2, D3 |
| 2 | 470nF | C_0805_2012Metric | C1, C2 |
| 3 | 100nF | C_0805_2012Metric | C3, C4, C7 |
| 2 | 100uF | CAP_EEE1AA101SP | C5, C6 |
| 2 | RC0603FR-0747KL 33k Yageo | R_0805_2012Metric | R1, R2 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | RC0603FR-0747KL 22k Yageo | R_0805_2012Metric | R3, R4 |
| 1 | 0 | R_0805_2012Metric | R5 |
| 3 | RC0402FR-131KL 0 Yageo | R_0805_2012Metric | R6, R7, R8 |
| 1 | RC0402FR-131KL 220 Yageo | R_0805_2012Metric | R9 |
| 1 | RC0402FR-131KL 270 Yageo | R_0805_2012Metric | R10 |
| 1 | RC0402FR-131KL 1k Yageo | R_0805_2012Metric | R11 |
| 4 | 1k | R_0805_2012Metric | R12, R13, R14, R15 |
| 1 | RC0603FR-0747KL 1k Yageo | R_0805_2012Metric | R16 |
| 2 | 5.1k | R_0805_2012Metric | R17, R18 |
Daisy Seed POD v1 design files
The KiCad project lives in the gfm16617/EngrEDU_Website repository on GitHub; these links point at the commit this page was built from.
Daisy Seed POD v1: common questions
How big is the Daisy Seed POD v1 PCB?
The Daisy Seed POD v1 measures 90 × 60 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Daisy Seed POD v1?
44 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Daisy Seed POD v1 design files?
From the gfm16617/EngrEDU_Website repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Daisy Seed POD v1 design in my own project?
The repository has no license, so all rights stay with gfm16617. Use it as a reference, and ask the author before reusing the design.
More boards in EngrEDU_Website
STM322026 STM32H7 FPAA v1
68.6 × 53.3 mm91 parts4LNo license3
RP2040/RP23502026 ESP32 FPAA v3
68.6 × 53.3 mm82 parts4LNo license3
RP2040/RP23502026 12 2Wheel Balance Robot v1
68.6 × 53.4 mm56 parts2LNo license3
RP2040/RP2350VCO PCB B REV2
81.3 × 100 mm52 parts2LNo license3
RP2040/RP2350Levitation Analog v1
90 × 55 mm44 parts2LNo license3
Uno Shield DSP Class v1
83.8 × 53.3 mm44 parts2LNo license3
RP2040/RP23502024 11 STM32F303 DaisyShape v1 3
61 × 22.5 mm31 parts4LNo license3
RP2040/RP2350AudioMixer Duo LBB
100 × 85.3 mm27 parts2LNo license3
FPAA Starter Board
49.3 × 33 mm24 parts4LNo license3
2024 ECG FinalProject
72.3 × 39.6 mm21 parts2LNo license3
RP2040/RP2350AudioMixer LBB
95 × 60 mm21 parts2LNo license3