Levitation Analog v1
About the Levitation Analog v1 PCB
Levitation Analog v1 is an open source RP2040/RP2350 PCB design by gfm16617, published on GitHub. It is a 2-layer board measuring 90 × 55 mm, with 44 components from 35 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the NCP1117IST33T3G, W25Q128JVSIM and INA169NA_250. By type, the board carries 8 test points, 7 connectors, 7 capacitors, 7 resistors, 4 ICs and 4 diodes.
Main components on the Levitation Analog v1
Levitation Analog v1 bill of materials (BOM)
44 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | NCP1117IST33T3G LM358 | SOP-8_3.76x4.96mm_P1.27mm | U1 |
| 1 | RP2040 LM1117MP-5.0 | SOT-223-3_TabPin2 | U2 |
| 1 | W25Q128JVSIM LM358 | SOP-8_3.76x4.96mm_P1.27mm | U3 |
| 1 | INA169NA_250 | SOT95P280X145-5N | U4 |
| 1 | CONN_01X02 HALL_SENSOR_CONN | JST_XA_B03B-XASK-1_1x03_P2.50mm_Vertical | J1 |
| 1 | 10118194-0001LF HE_FILTER_CONN | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | CONN_01X15 CS_FILTER_CONN | PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | CONN_01X15 PWR_CONN | JST_XA_B03B-XASK-1_1x03_P2.50mm_Vertical | J4 |
| 1 | COIL_CONN | JST_XA_B03B-XASK-1_1x03_P2.50mm_Vertical | J5 |
| 1 | CS_SW_CONN | PinHeader_1x03_P2.54mm_Vertical | J6 |
| 1 | PWR_CONN | BarrelJack_Horizontal | J7 |
| 2 | IRF630SPBF | TO-263AB_HIGHVOLTAGE-M | MOSFET1, MOSFET2 |
| 3 | 10k | Potentiometer_Alps_RK09K_Single_Vertical | RV1, RV2, RV3 |
| 1 | 1k | Potentiometer_Alps_RK09K_Single_Vertical | RV4 |
| 1 | JS202011SCQN | SW_JS202011SCQN | S1 |
| 1 | Sig1 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP1 |
| 1 | Sig2 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP2 |
| 1 | Sig_GND | TestPoint_Loop_D2.50mm_Drill1.0mm | TP3 |
| 1 | Sig4 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP4 |
| 1 | Sig5 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP5 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Sig6 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP6 |
| 1 | Sig7 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP7 |
| 1 | Sig8 | TestPoint_Loop_D2.50mm_Drill1.0mm | TP8 |
| 1 | IN-S42BTR SM516 | D_MELF | D1 |
| 3 | LED | LED_1206_3216Metric | D2, D3, D4 |
| 1 | 04024D106MAT2A 200nF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C1 |
| 1 | 04024D106MAT2A 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C2 |
| 2 | 0402YC104KAT2A 10uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C3, C4 |
| 3 | 0402YC104KAT2A 0.1uF | C_1206_3216Metric_Pad1.33x1.80mm_HandSolder | C5, C6, C7 |
| 1 | CRT0402-BY-1001GLF 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R1 |
| 1 | 100k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R2 |
| 1 | RCS040227R0FKED 10k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3 |
| 1 | RCS040227R0FKED 0.1 | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4 |
| 2 | CRT0402-BY-1001GLF 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R5, R6 |
| 1 | 1k | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7 |
Levitation Analog v1 design files
The KiCad project lives in the gfm16617/EngrEDU_Website repository on GitHub; these links point at the commit this page was built from.
Levitation Analog v1: common questions
What microcontroller does the Levitation Analog v1 use?
The Levitation Analog v1 is built around the RP2040, from the RP2040/RP2350 family.
How big is the Levitation Analog v1 PCB?
The Levitation Analog v1 measures 90 × 55 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Levitation Analog v1?
44 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Levitation Analog v1 design files?
From the gfm16617/EngrEDU_Website repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Levitation Analog v1 design in my own project?
The repository has no license, so all rights stay with gfm16617. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Levitation Analog v1 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in EngrEDU_Website
STM322026 STM32H7 FPAA v1
68.6 × 53.3 mm91 parts4LNo license3
RP2040/RP23502026 ESP32 FPAA v3
68.6 × 53.3 mm82 parts4LNo license3
RP2040/RP23502026 12 2Wheel Balance Robot v1
68.6 × 53.4 mm56 parts2LNo license3
RP2040/RP2350VCO PCB B REV2
81.3 × 100 mm52 parts2LNo license3
Daisy Seed POD v1
90 × 60 mm44 parts2LNo license3
Uno Shield DSP Class v1
83.8 × 53.3 mm44 parts2LNo license3
RP2040/RP23502024 11 STM32F303 DaisyShape v1 3
61 × 22.5 mm31 parts4LNo license3
RP2040/RP2350AudioMixer Duo LBB
100 × 85.3 mm27 parts2LNo license3
FPAA Starter Board
49.3 × 33 mm24 parts4LNo license3
2024 ECG FinalProject
72.3 × 39.6 mm21 parts2LNo license3
RP2040/RP2350AudioMixer LBB
95 × 60 mm21 parts2LNo license3
Similar boards
RP2040/RP2350Open Book Abridged Edition
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1k
RP2040/RP2350Corne
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350Corne
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7k
RP2040/RP2350LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0k
RP2040/RP2350Jitx design
55.5 × 65 mm26 parts4LGPL-3.05.0k
RP2040/RP2350Pro V2
kata0510
290.1 × 130 mm270 parts2LMIT2.3k