AC-DC-Converter with-LM317
Gilbert-box·AC-DC-Converter-with-LM317·AC DC converter LM317/AC DC converter LM317.kicad_pcb
About the AC-DC-Converter with-LM317 PCB
AC-DC-Converter with-LM317 is an open source PCB design by Gilbert-box, published on GitHub under the MIT license. It is a 2-layer board measuring 50 × 50 mm, with 17 components from 12 distinct parts.
Other key parts include the LM317_TO-220. By type, the board carries 4 connectors, 4 diodes, 4 capacitors, 3 resistors and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
Adjustable/Fixed DC power supply using LM317 with bridge rectifier and filtering capacitors.
This is a AC-DC Converter with LM317 voltage regulator IC. It converts an AC input into a stable adjustable or fixed 5V DC output using a full-wave bridge rectifier, filter capacitors, and LM317 regulator.
- Input: AC 12–15V (via transformer secondary) - Output: 1.25V – 12V DC (adjustable) or 5V Fixed (depends on input voltage and load conditions) - Maximum Output Current: 1A (need to add heatsink) - Built-in fuse protection on AC input

Main components on the AC-DC-Converter with-LM317
AC-DC-Converter with-LM317 bill of materials (BOM)
17 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM317_TO-220 | TO-220-3_Vertical | U1 |
| 1 | Input AC | TerminalBlock_bornier-2_P5.08mm | J1 |
| 1 | Output | TerminalBlock_bornier-2_P5.08mm | J2 |
| 1 | Conn_01x04_Socket | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | 10k | Potentiometer_Bourns_3296W_Vertical | RV1 |
| 4 | 1N4007 | D_DO-41_SOD81_P10.16mm_Horizontal | D1, D2, D3, D4 |
| 2 | 1000uF | CP_Radial_D10.0mm_P5.00mm | C1, C4 |
| 2 | 100nF | C_Rect_L7.0mm_W2.5mm_P5.00mm | C2, C3 |
| 1 | 240 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 510 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 220 | R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3 |
AC-DC-Converter with-LM317 design files
The KiCad project lives in the Gilbert-box/AC-DC-Converter-with-LM317 repository on GitHub; these links point at the commit this page was built from.
AC-DC-Converter with-LM317: common questions
How big is the AC-DC-Converter with-LM317 PCB?
The AC-DC-Converter with-LM317 measures 50 × 50 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the AC-DC-Converter with-LM317?
17 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the AC-DC-Converter with-LM317 design files?
From the Gilbert-box/AC-DC-Converter-with-LM317 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the AC-DC-Converter with-LM317 design in my own project?
Yes, under the terms of its MIT license, which Gilbert-box chose for the repository.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k