ESP32-Ethernet-Gateway
GirishTabaraddi·ESP32-Ethernet-Gateway-KiCAD·ESP32_Ethernet_Gateway/switch.kicad_sch
About the ESP32-Ethernet-Gateway PCB
ESP32-Ethernet-Gateway is an open source PCB design by GirishTabaraddi, published on GitHub. It is a board, with 39 components from 11 distinct parts.
Other key parts include the KSZ8863MLLI. By type, the board carries 18 resistors, 12 capacitors, 4 connectors, 2 ICs, 2 crystals and 1 inductor.
It belongs with the power & battery and iot & wireless designs in this gallery.
From the project
A professionally structured, production-ready KiCad schematic integrating an ESP32-WROOM-32D with wired dual-port Ethernet, high-speed USB-C debugging, and an onboard AC/DC power supply.
This product will be installed in the fishold of fishing vessels, close to the digital scale. The digital scale has a single ethernet port which connects the head unit to a central database server on the bridge of the vessel. Via this ethernet connection the scale beacon can capture weighing events and broadcast them via BLE broadcast.
This hardware consists of a single PCB that contains: - A 230V to 3.3V power supply - A 3-port 10/100Mbps ethernet switch - An SPI-Ethernet bridge - An ESP32-S3-WROOM-1 wireless microcontroller module
Main components on the ESP32-Ethernet-Gateway
ESP32-Ethernet-Gateway bill of materials (BOM)
39 components, 11 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | KSZ8863MLLI Microchip Tech | KSZ8863MLLI_LQFP-48_7x7mm_P0.5mm | U1, U4 |
| 2 | SG-210STF Epson Timing | Oscillator_SMD_SeikoEpson_SG210-4Pin_2.5x2.0mm | Y1, Y2 |
| 4 | RJ45_Amphenol_RJMG1BD3B8K1ANR Amphenol ICC | RJ45_Amphenol_RJMG1BD3B8K1ANR | J1, J2, J3, J4 |
| 1 | FerriteBead_Small Murata Electronics | L_0805_2012Metric | FB1 |
| 2 | 1nF 2kV Murata Electronics | C_1812_4532Metric | C1, C14 |
| 10 | 0.1uF YAGEO | C_0805_2012Metric | C2, C3, C4, C5, C8, C10, C11, C12 +2 |
| 2 | 4.7k YAGEO | R_0805_2012Metric | R1, R18 |
| 2 | 1M YAGEO | R_0805_2012Metric | R2, R10 |
| 8 | 330 YAGEO | R_0805_2012Metric | R3, R4, R5, R6, R11, R12, R13, R14 |
| 4 | 10k YAGEO | R_0805_2012Metric | R7, R8, R16, R17 |
| 2 | 1k YAGEO | R_0805_2012Metric | R9, R15 |
ESP32-Ethernet-Gateway design files
The KiCad project lives in the GirishTabaraddi/ESP32-Ethernet-Gateway-KiCAD repository on GitHub; these links point at the commit this page was built from.
ESP32-Ethernet-Gateway: common questions
How many components are on the ESP32-Ethernet-Gateway?
39 components, from 11 distinct parts. The full bill of materials is listed on this page.
Where can I download the ESP32-Ethernet-Gateway design files?
From the GirishTabaraddi/ESP32-Ethernet-Gateway-KiCAD repository on GitHub, which has the schematic; the links under Design files point to each one.
Can I use the ESP32-Ethernet-Gateway design in my own project?
The repository has no license, so all rights stay with GirishTabaraddi. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1k