Octaver
glittershark·jazz·hardware/projects/octaver/octaver.kicad_pcb
About the Octaver PCB
Octaver is an open source PCB design by glittershark, published on GitHub. It is a 2-layer board measuring 121 × 84.6 mm, with 53 components from 44 distinct parts.
Other key parts include the CD4051B, TL072 and IS31FL3731-QF. By type, the board carries 19 resistors, 9 capacitors, 7 connectors, 6 ICs, 5 switches and 1 diode.
From the project
daisy seed effect firmware
Main components on the Octaver
Octaver bill of materials (BOM)
53 components, 44 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | CD4051B TL072 | SOIC-8_3.9x4.9mm_P1.27mm | U1, U2 |
| 1 | TL072 | SOIC-8_3.9x4.9mm_P1.27mm | U3 |
| 1 | CD4051B LM311 | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | CD4051B 40175 | SOIC-16W_5.3x10.2mm_P1.27mm | U6 |
| 1 | IS31FL3731-QF AD633JNZ | DIP-8_W7.62mm | U7 |
| 1 | In | mono_jack | J1 |
| 1 | Out | mono_jack | J2 |
| 1 | Power | PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | pot_hp | PinHeader_1x10_P2.54mm_Vertical | J4 |
| 1 | sw_hp | PinHeader_1x10_P2.54mm_Vertical | J5 |
| 1 | main board | PinHeader_1x04_P2.54mm_Vertical | J8 |
| 1 | fs board | PinHeader_1x04_P2.54mm_Vertical | J9 |
| 2 | A250k | Taiss_Potentiometer_vertical | RV2, RV6 |
| 1 | B500K | Taiss_Potentiometer_vertical | RV3 |
| 1 | C100K | Taiss_Potentiometer_vertical | RV5 |
| 1 | A20K | Taiss_Potentiometer_vertical | RV7 |
| 1 | C1M | Taiss_Potentiometer_vertical | RV8 |
| 1 | Integrator On | Adam Tech SW-T3-2B-A-A3-S1 | SW1 |
| 1 | stable / alive | Adam Tech SW-T3-2B-A-A3-S1 | SW2 |
| 1 | Differentiator On | Adam Tech SW-T3-2B-A-A3-S1 | SW3 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Octave Lo/Hi | Adam Tech SW-T3-2B-A-A3-S1 | SW4 |
| 1 | Footswitch | PBS-24-302_3PDT | SW6 |
| 1 | C375568 On | LED_D5.0mm | D1 |
| 1 | 33N 1u | C_0603_1608Metric | C1 |
| 1 | 33N 470n | C_0603_1608Metric | C2 |
| 2 | 4.7U 220u | CP_Elec_8x10.5 | C3, C4 |
| 1 | 2.2U 470n | C_0603_1608Metric | C5 |
| 1 | 4.7U 4.7n | C_0603_1608Metric | C6 |
| 1 | 4.7U 3.3n | C_0603_1608Metric | C7 |
| 1 | 220N 22n | C_0603_1608Metric | C8 |
| 1 | 100N 10u | C_0603_1608Metric | C9 |
| 4 | 1M | R_0402_1005Metric | R1, R2, R16, R20 |
| 1 | 12k | R_0402_1005Metric | R3 |
| 2 | 10k | R_0402_1005Metric | R4, R9 |
| 1 | 2.2k | R_0402_1005Metric | R5 |
| 3 | 100k | R_0402_1005Metric | R6, R7, R17 |
| 1 | 100 1k | R_0402_1005Metric | R8 |
| 1 | 100 10k | R_0402_1005Metric | R10 |
| 1 | 4.7K 100k | R_0402_1005Metric | R11 |
| 1 | 20K 1k | R_0402_1005Metric | R12 |
| 1 | 4.7K 12k | R_0402_1005Metric | R13 |
| 1 | 4.7K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R14 |
| 1 | 100K 1.5k | R_0402_1005Metric | R15 |
| 1 | 2k | R_0402_1005Metric | R19 |
Octaver design files
The KiCad project lives in the glittershark/jazz repository on GitHub; these links point at the commit this page was built from.
Octaver: common questions
How big is the Octaver PCB?
The Octaver measures 121 × 84.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Octaver?
53 components, from 44 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Octaver design files?
From the glittershark/jazz repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Octaver design in my own project?
The repository has no license, so all rights stay with glittershark. Use it as a reference, and ask the author before reusing the design.