10 open source boards using the IS31FL3731-QF
Real designs built with the IS31FL3731-QF, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Optical keyboard mx
girishji
324.8 × 186 mm413 parts2LMIT22Microchip SAM
Badge2020
bornhack
71.5 × 141.1 mm346 parts2LCC-BY-SA-4.012AVR/Arduino
Hourglass reva
geschmit
34 × 45.9 mm93 parts4LApache-2.04RP2040/RP2350
Pcb
girishji
309.5 × 188.8 mm324 parts2LNo license2- schematic only · 110 partsRaspberry Pi
Smart chess
promaaa
110 partsMIT2 AVR/Arduino
Butterflynet
unit117
30 × 430 mm270 parts4LMIT1STM32
USB-C-Portable-PSU
Ng-Chen-Xuan
58 × 58 mm151 parts4LCERN-OHL-S-2.00Devboard
glittershark
198.1 × 139.7 mm123 parts2LNo license0RP2040/RP2350
Fluid dynamics
souptik-samanta
50.1 × 32 mm102 parts4LNo license0Octaver
glittershark
121 × 84.6 mm53 parts2LNo license0
How designs wire the IS31FL3731-QF
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the IS31FL3731-QF connects to, and the resistors, capacitors and other passives placed on it.
- The R_EXT pin has a resistor to GND on 8 of 8 designs, most often 20 kΩ.
- The C_FILT pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 1 µF).
- The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 10 µF (then 100 nF).
- The AD pin is tied to GND on 6 of 8 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VCCpin 2 | Connected to: 3.3V 88% |
|
| SDBpin 3 | Connected to: The microcontroller 38%, IS31FL3731-QF 25% |
|
| INTBpin 4 | Connected to: Signal 50% · not connected 38% |
|
| GNDpin 5, 29 | Connected to: GND 100% | — |
| R_EXTpin 6 | Connected to: Signal 100% |
|
| CB9pin 15 | Connected to: Not connected 63% · a signal 38% | — |
| C_FILTpin 16 | Connected to: Signal 88% |
|
| INpin 17 | Connected to: Not connected 63% · a signal 25% | — |
| ADpin 18 | Connected to: GND 75% · a signal 25% | — |
| SDApin 19 | Connected to: The microcontroller 75%, IS31FL3731-QF 25% |
|
| SCLpin 20 | Connected to: The microcontroller 75%, IS31FL3731-QF 25% |
|
17 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Optical keyboard mx by girishji, Badge2020 by bornhack, Hourglass reva by geschmit and Pcb by girishji.
The IS31FL3731-QF in open source designs
The gallery holds 10 open source boards using the IS31FL3731-QF from 9 GitHub repositories; a typical one measures about 71.5 × 139.7 mm and carries around 137 components.
56% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is Optical keyboard mx by girishji.
Parts used alongside the IS31FL3731-QF
Microcontrollers on boards using the IS31FL3731-QF
What boards using the IS31FL3731-QF are built for
IS31FL3731-QF: common questions
Where can I find a IS31FL3731-QF reference design?
Each of the 10 boards on this page is a real design using the IS31FL3731-QF. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the IS31FL3731-QF R_EXT pin?
The R_EXT pin has a resistor to GND on 8 of 8 designs, most often 20 kΩ. Counted from the KiCad layouts of 8 open source designs using the IS31FL3731-QF.
How is the IS31FL3731-QF C_FILT pin connected?
The C_FILT pin has a capacitor to GND on 7 of 8 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 8 open source designs using the IS31FL3731-QF.
What decoupling capacitors do designs use on the IS31FL3731-QF VCC pin?
The VCC pin has a decoupling capacitor on 5 of 8 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the IS31FL3731-QF.
Which microcontrollers do boards using the IS31FL3731-QF use?
Most are built on AVR/Arduino (2), RP2040/RP2350 (2), Raspberry Pi (1) and Microchip SAM (1).
How big is a typical board using the IS31FL3731-QF?
The median is 71.5 × 139.7 mm, and 56% are two-layer designs.
What is the most popular open source board using the IS31FL3731-QF?
By GitHub stars, Optical keyboard mx by girishji, with 22 stars.
Can I simulate one of these boards using the IS31FL3731-QF before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.