G206 CAMEL TP CAO
glm02·projet-vide-cave·03_Electronique/G206A_CAMEL_TP_CAO/G206_CAMEL_TP_CAO.kicad_pcb
About the G206 CAMEL TP CAO PCB
G206 CAMEL TP CAO is an open source PIC PCB design by glm02, published on GitHub. It is a 2-layer board measuring 90 × 80 mm, with 21 components from 15 distinct parts.
Its main chip is the PIC16F1788-xSP, from the PIC family. Other key parts include the Capteur de courant. By type, the board carries 9 resistors, 3 connectors, 3 capacitors, 2 ICs, 1 switch and 1 diode.
From the project
Projet GEII vide-cave : carte KiCad G206, analyse, notes Obsidian et visualisation Anatomy. Conception en cours.
Statut : conception en cours — voir plus bas ce qui reste à câbler et à valider.
Ce que j'ai fait : reprise et nettoyage de la carte KiCad, comparaison schéma/PCB/ nomenclature, dimensionnement de l'optotriac (MOC3041) avec bancs LTspice, maquette 3D de l'installation, visualisation interactive de la carte, et organisation du projet pour travailler à deux sous Git.

Main components on the G206 CAMEL TP CAO
G206 CAMEL TP CAO bill of materials (BOM)
21 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F1788-xSP | DIP-28_W7.62mm_LongPads | U1 |
| 1 | Capteur de courant | Allegro_CB_PFF | U3 |
| 1 | Alimentation | Bornier_1x02_L10mm_W7.5mm_P5mm | J1 |
| 1 | Série (TTL) | PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_PIC_ICSP_ICD | PicKit_4_Snap_1x08_P2.54mm_Vertical | J4 |
| 1 | 162B-CC_BC-3LP | 162B | DS1 |
| 1 | B3F-1000 | SW_TH_Tactile_Omron_B3F-10xx | SW4 |
| 1 | octo-triac | SMDIP-4_W7.62mm | TRIAC1 |
| 1 | LED R | LED_D5.0mm | D4 |
| 1 | 47uF | CP_Radial_D6.3mm_P2.50mm | C1 |
| 2 | 100n | C_Disc_D4.7mm_W2.5mm_P5.00mm | C2, C5 |
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R12 |
| 4 | 270 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R9, R10, R14 |
| 1 | 56k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R11 |
| 1 | 1,5k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R13 |
G206 CAMEL TP CAO design files
The KiCad project lives in the glm02/projet-vide-cave repository on GitHub; these links point at the commit this page was built from.
G206 CAMEL TP CAO: common questions
What microcontroller does the G206 CAMEL TP CAO use?
The G206 CAMEL TP CAO is built around the PIC16F1788-xSP, from the PIC family.
How big is the G206 CAMEL TP CAO PCB?
The G206 CAMEL TP CAO measures 90 × 80 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the G206 CAMEL TP CAO?
21 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the G206 CAMEL TP CAO design files?
From the glm02/projet-vide-cave repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the G206 CAMEL TP CAO design in my own project?
The repository has no license, so all rights stay with glm02. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the G206 CAMEL TP CAO without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in projet-vide-cave
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379