Vide cave 5A

glm02·projet-vide-cave·03_Electronique/Carte_vide_cave_PIC_Allegro_TRIAC/Vide_cave_5A.kicad_pcb

Vide cave 5A PCB layout, top view — open source PIC board by glm02

About the Vide cave 5A PCB

Vide cave 5A is an open source PIC PCB design by glm02, published on GitHub. It is a 2-layer board measuring 190 × 130 mm, with 31 components from 28 distinct parts.

Its main chip is the PIC16F1788-I/SP, from the PIC family. Other key parts include the ACS756SCB-100B-PFF-T and MOC3083TVM. By type, the board carries 11 resistors, 7 connectors, 5 capacitors, 3 ICs, 2 transistors and 1 fuse.

From the project

Projet GEII vide-cave : carte KiCad G206, analyse, notes Obsidian et visualisation Anatomy. Conception en cours.

Statut : conception en cours — voir plus bas ce qui reste à câbler et à valider.

Ce que j'ai fait : reprise et nettoyage de la carte KiCad, comparaison schéma/PCB/ nomenclature, dimensionnement de l'optotriac (MOC3041) avec bancs LTspice, maquette 3D de l'installation, visualisation interactive de la carte, et organisation du projet pour travailler à deux sous Git.

Vide cave 5A, from the project README
From the project README

Main components on the Vide cave 5A

PIC16F1788-I/SPACS756SCB-100B-PFF-TMOC3083TVM

Vide cave 5A bill of materials (BOM)

31 components, 28 distinct parts.

QtyPartRefs
1
PIC16F1788-I/SP
U1
1
ACS756SCB-100B-PFF-T
U2
1
MOC3083TVM
U3
1
BTA16-800CRG
Q1
1
2N3904
Q2
1
SECTEUR L N
J1
1
POMPE L N
J2
1
5V ISOLEE
J3
1
ICSP PICkit
J4
1
LCD 16x2 4 BITS
J5
1
BOUTONS IHM
J6
1
UART TTL 5V
J7
1
T3.15A HBC 250VAC
F1
1
10k CONTRASTE
RV1
1
LED POMPE
D1
2
100nF
C1, C3
1
47uF 16V
C2
1
10nF
C4
1
10nF X2 305VAC
C5
1
10k
R1
Show 8 more
QtyPartRefs
2
1k
R2, R10
1
4.7k
R3
1
100k
R4
1
330R
R5
2
91R 0.5W
R6, R7
1
330R 0.5W
R8
1
39R 1W
R9
1
220R
R11

Vide cave 5A design files

The KiCad project lives in the glm02/projet-vide-cave repository on GitHub; these links point at the commit this page was built from.

Vide cave 5A: common questions

What microcontroller does the Vide cave 5A use?

The Vide cave 5A is built around the PIC16F1788-I/SP, from the PIC family.

How big is the Vide cave 5A PCB?

The Vide cave 5A measures 190 × 130 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Vide cave 5A?

31 components, from 28 distinct parts. The full bill of materials is listed on this page.

Where can I download the Vide cave 5A design files?

From the glm02/projet-vide-cave repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Vide cave 5A design in my own project?

The repository has no license, so all rights stay with glm02. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Vide cave 5A without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in projet-vide-cave

Similar boards