IndoorNode
Global-Health-Engineering·remote-comm-solar·hardware/PCB/indoorNode/indoorNode.kicad_pcb
About the IndoorNode PCB
IndoorNode is an open source PCB design by Global-Health-Engineering, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 68 × 110 mm, with 19 components from 9 distinct parts.
By type, the board carries 14 resistors and 5 connectors.
It belongs with the power & battery designs in this gallery.
From the project
This directory contains PCB layouts and electronic circuit schematics created with KiCad for the: - indoor node - outdoor node - repeater node
IndoorNode bill of materials (BOM)
19 components, 9 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LED | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J1 |
| 1 | SmartShunt | TerminalBlock_MaiXu_MX126-5.0-02P_1x02_P5.00mm | J2 |
| 1 | Battery +/- | JST_PH_B2B-PH-K_1x02_P2.00mm_Vertical | J3 |
| 1 | ebikes | TerminalBlock_MaiXu_MX126-5.0-08P_1x08_P5.00mm | J5 |
| 1 | DHT22 | TerminalBlock_MaiXu_MX126-5.0-03P_1x03_P5.00mm | J6 |
| 1 | 22K 22k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 2 | 100 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R4 |
| 6 | 10K 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R6, R7, R9, R11, R13 |
| 5 | 18K 18k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R8, R10, R12, R14 |
IndoorNode design files
The KiCad project lives in the Global-Health-Engineering/remote-comm-solar repository on GitHub; these links point at the commit this page was built from.
IndoorNode: common questions
How big is the IndoorNode PCB?
The IndoorNode measures 68 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the IndoorNode?
19 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the IndoorNode design files?
From the Global-Health-Engineering/remote-comm-solar repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the IndoorNode design in my own project?
Yes, under the terms of its Apache-2.0 license, which Global-Health-Engineering chose for the repository.
More boards in remote-comm-solar
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k