Stm32f407 board
glocklueng·rusefi·hardware/brain_board/stm32f407_board.kicad_pcb
About the Stm32f407 board
Stm32f407 board is an open source STM32 PCB design by glocklueng, published on GitHub. It is a 2-layer board measuring 61.8 × 73.2 mm, with 66 components from 30 distinct parts.
Its main chip is the STM32F407VG, from the STM32 family. Other key parts include the NUF2101MT1G and LM2937. By type, the board carries 22 capacitors, 14 resistors, 11 diodes, 5 connectors, 5 jumpers and 3 ICs.
From the project
https://svn.code.sf.net/p/rusefi/code/trunk/
current binaries are always available at http://rusefi.com/build_server/
Main components on the Stm32f407 board
Stm32f407 board bill of materials (BOM)
66 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | STM32F407VG | TQFP_100 | U1 |
| 1 | NUF2101MT1G | SOT-457 | U2 |
| 1 | LM2937 | SOT223 | U3 |
| 1 | CRYSTAL | HC-49V | X1 |
| 1 | CRYSTAL(MC306) | MC-306 | X2 |
| 1 | MINI-USB-5P-3400020P1 | MINI-USB-5P-3400020P1 | J1 |
| 2 | CONN_25X2 | PIN_ARRAY_25x2_A | P1, P2 |
| 1 | CONN_2 | PIN_ARRAY_2_A | P3 |
| 1 | CONN_6 | PIN_ARRAY-6X1 | P4 |
| 1 | BATTERY_CR2032 | BATT_CR2032_MPD | BT1 |
| 4 | JUMPER | JUMPER-2 | JP1, JP2, JP3, JP4 |
| 1 | JUMPER3 | SIL-3 | JP5 |
| 2 | SW_PUSH | TL-1105 | SW1, SW2 |
| 7 | BLUE_LED_0805 | LED-0805_A | D1, D2, D3, D4, D7, D8, D11 |
| 4 | PMEG2010EA | SOD-323 | D5, D6, D9, D10 |
| 1 | FILTER | SM0805 | FB1 |
| 1 | 20nF | SM0805 | C1 |
| 4 | 18pF | SM0805 | C2, C3, C21, C22 |
| 3 | 2u2F | SM0805 | C4, C15, C17 |
| 2 | 0.01uF | SM0805 | C5, C8 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 1uF | SM0805 | C6, C7, C16 |
| 8 | 0.1uF | SM0805 | C9, C10, C11, C12, C13, C14, C18, C20 |
| 1 | 4.7uF | SM0805 | C19 |
| 3 | 10k | SM0805 | R1, R3, R4 |
| 1 | 100R | SM0805 | R2 |
| 1 | 330R | SM0805 | R5 |
| 4 | 680R | SM0805 | R6, R7, R8, R9 |
| 1 | 47R | SM0805 | R10 |
| 3 | 1k | SM0805 | R11, R12, R13 |
| 1 | 100k | SM0805 | R14 |
Stm32f407 board design files
The KiCad project lives in the glocklueng/rusefi repository on GitHub; these links point at the commit this page was built from.
Stm32f407 board: common questions
What microcontroller does the Stm32f407 board use?
The Stm32f407 board is built around the STM32F407VG, from the STM32 family.
How big is the Stm32f407 board?
The Stm32f407 board measures 61.8 × 73.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Stm32f407 board?
66 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Stm32f407 board design files?
From the glocklueng/rusefi repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Stm32f407 board design in my own project?
The repository has no license, so all rights stay with glocklueng. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Stm32f407 board without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in rusefi
STM32
Frankenso
glocklueng
154.1 × 161.7 mm565 parts2LNo license0High or low side drive board for RUSEFI.com
glocklueng
100 × 100 mm256 parts2LNo license0Stimulator
glocklueng
101.6 × 32.4 mm150 parts2LNo license0STM32
TCPL-STM-CAN
glocklueng
147.6 × 102 mm127 parts2LNo license0Adc amp divider
glocklueng
76.2 × 52.7 mm118 parts2LNo license0Adc amp divider vert
glocklueng
44 × 70 mm81 parts2LNo license0STM32
176 pin board
glocklueng
61.8 × 73.2 mm76 parts2LNo license0Breakout TLE6244
glocklueng
50.8 × 38.1 mm73 parts2LNo license0Inj 12ch
glocklueng
47 × 58.9 mm59 parts2LNo license0VR board
glocklueng
27.3 × 17.8 mm28 parts2LNo license0284617-1
glocklueng
150 × 50 mm25 parts2LNo license0
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k