15 open source boards using the LM2937

Real designs built with the LM2937, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the LM2937

Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the LM2937 connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a capacitor to GND on 7 of 8 designs, most often 4.7 µF (then 100 nF).
  • Pin 3 has a decoupling capacitor on 7 of 8 designs, most often 1 µF (then 100 nF).
  • Pin 4 is tied to GND on 8 of 8 designs.
  • Pin 2 is tied to GND on 7 of 8 designs.
Pin 1Connected to: Signal 75% · 5V 25%
  • Capacitor to GND on 88% · 4.7 µF (7), 100 nF (7)
Pin 2Connected to: GND 88%
Pin 3Connected to: VDD 88%
  • Decoupling capacitor on 88% · 1 µF (5), 100 nF (2)
Pin 4Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 176 pin board by rusefi, Frankenso by rusefi, 176 pin board by rusefi and Frankenso by rusefi.

The LM2937 in open source designs

The gallery holds 15 open source boards using the LM2937 from 8 GitHub repositories; a typical one measures about 61.8 × 73.2 mm and carries around 76 components.

93% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.

The most starred is 176 pin board by rusefi.

Microcontrollers on boards using the LM2937

What boards using the LM2937 are built for

LM2937: common questions

Where can I find a LM2937 reference design?

Each of the 15 boards on this page is a real design using the LM2937. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LM2937 pin 1 connected?

Pin 1 has a capacitor to GND on 7 of 8 designs, most often 4.7 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the LM2937.

What decoupling capacitors do designs use on the LM2937 pin 3?

Pin 3 has a decoupling capacitor on 7 of 8 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 8 open source designs using the LM2937.

How is the LM2937 pin 4 connected?

Pin 4 is tied to GND on 8 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the LM2937.

What parts are used alongside the LM2937?

The NUF2101MT1G, AMS1117-3.3, MAX31855KASA, SN65HVD230 and STM32F407VG appear in the most repositories here.

Which microcontrollers do boards using the LM2937 use?

Most are built on STM32 (15).

How big is a typical board using the LM2937?

The median is 61.8 × 73.2 mm, and 93% are two-layer designs.

What is the most popular open source board using the LM2937?

By GitHub stars, 176 pin board by rusefi, with 1,177 stars.

Can I simulate one of these boards using the LM2937 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part