15 open source boards using the NUF2101MT1G
Real designs built with the NUF2101MT1G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Frankenso
rusefi
154.1 × 161.7 mm614 parts2LNo license48FaradayRF-Hardware
FaradayRF
74.9 × 53.3 mm139 parts4LTAPR-OHL-1.043STM32
Frankenso
glocklueng
154.1 × 161.7 mm565 parts2LNo license0STM32
Frankenso
rusefi
147.6 × 102 mm127 parts2LNo license2STM32
TCPL-STM-CAN
glocklueng
147.6 × 102 mm127 parts2LNo license0STM32
176 pin board
rusefi
61.8 × 73.2 mm76 parts2LGPL-3.01.2kSTM32
176 pin board
rusefi
61.8 × 73.2 mm76 parts2LNo license2STM32
176 pin board
rusefillc
61.8 × 73.2 mm76 parts2LGPL-3.02STM32
176 pin board
lanjay1
61.8 × 73.2 mm76 parts2LGPL-3.00STM32
Brain board STM32F407
rusefi
61.8 × 73.2 mm69 parts2LGPL-3.01.2kSTM32
Brain board STM32F407
rusefi
61.8 × 73.2 mm69 parts2LNo license2STM32
Brain board STM32F407
rusefillc
61.8 × 73.2 mm69 parts2LGPL-3.02STM32
Brain board STM32F407
lanjay1
61.8 × 73.2 mm69 parts2LGPL-3.00STM32
176 pin board
glocklueng
61.8 × 73.2 mm76 parts2LNo license0STM32
Stm32f407 board
glocklueng
61.8 × 73.2 mm66 parts2LNo license0
How designs wire the NUF2101MT1G
Read from the KiCad layouts of 8 open source designs, one per repository: what each pin of the NUF2101MT1G connects to, and the resistors, capacitors and other passives placed on it.
- Pin 5 has a series resistor on 7 of 8 designs, most often 1 kΩ.
- Pin 2 is tied to GND on 7 of 8 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: GND 88% | — |
| Pin 5 | Connected to: A connector 100%, AMS1117-3.3 38%, the microcontroller 38% |
|
4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 176 pin board by rusefi, Frankenso by rusefi, FaradayRF-Hardware by FaradayRF and 176 pin board by rusefi.
The NUF2101MT1G in open source designs
The gallery holds 15 open source boards using the NUF2101MT1G from 8 GitHub repositories; a typical one measures about 61.8 × 73.2 mm and carries around 76 components.
93% are two-layer designs, the rest use four layers or more, and 47% carry an open source license.
The most starred is 176 pin board by rusefi.
Parts used alongside the NUF2101MT1G
Microcontrollers on boards using the NUF2101MT1G
What boards using the NUF2101MT1G are built for
NUF2101MT1G: common questions
Where can I find a NUF2101MT1G reference design?
Each of the 15 boards on this page is a real design using the NUF2101MT1G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the NUF2101MT1G pin 5?
Pin 5 has a series resistor on 7 of 8 designs, most often 1 kΩ. Counted from the KiCad layouts of 8 open source designs using the NUF2101MT1G.
How is the NUF2101MT1G pin 2 connected?
Pin 2 is tied to GND on 7 of 8 designs. Counted from the KiCad layouts of 8 open source designs using the NUF2101MT1G.
What parts are used alongside the NUF2101MT1G?
The LM2937, AMS1117-3.3, MAX31855KASA, SN65HVD230 and STM32F407VG appear in the most repositories here.
Which microcontrollers do boards using the NUF2101MT1G use?
Most are built on STM32 (14).
How big is a typical board using the NUF2101MT1G?
The median is 61.8 × 73.2 mm, and 93% are two-layer designs.
What is the most popular open source board using the NUF2101MT1G?
By GitHub stars, 176 pin board by rusefi, with 1,177 stars.
Can I simulate one of these boards using the NUF2101MT1G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.