HardLabs

Footprint review

gokcesena53·usb-pd-power-supply·hardware/docs/reports/output-update/footprint-review.kicad_pcb

Footprint review PCB layout, top view — open source board by gokcesena53

About the Footprint review PCB

Footprint review is an open source PCB design by gokcesena53, published on GitHub under the MIT license. It is a 2-layer board, with 4 components from 4 distinct parts.

It belongs with the power & battery designs in this gallery.

From the project

USB Type-C PD Programmable Power Supply

USB-C PD beslemeli, ESP32-C6 tabanlı, TFT ekranlı ve döner enkoderli masaüstü ayarlanabilir güç kaynağı. Şematik ve PCB tasarımı KiCad ile yapılmıştır.

Depo yapısı Open Hardware Template şablonunu izler.

.claude/skills/kicad-schematic/ altında şema üretimi ve temizliği için bir Claude Code skill'i ve iki bağımsız betik bulunur:

render.py şemayı PNG'ye çevirir ve mm cinsinden bir bölgeye yakınlaşır; verify.py ERC çalıştırıp netlist'i bir referansla karşılaştırır. Gereksinimler: kicad-cli, poppler-utils (pdftoppm, pdftotext), Python 3.

Footprint review bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
KLS_CR2032_05
FP1
1
DG142R-5.08-02P-14-00AH
FP2
1
Cinch_108-0902-001_Panel
FP3
1
Cinch_108-0903-001_Panel
FP4

Footprint review design files

The KiCad project lives in the gokcesena53/usb-pd-power-supply repository on GitHub; these links point at the commit this page was built from.

Footprint review: common questions

How big is the Footprint review PCB?

The Footprint review has 2 copper layers and is 1.6 mm thick.

How many components are on the Footprint review?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Footprint review design files?

From the gokcesena53/usb-pd-power-supply repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Footprint review design in my own project?

Yes, under the terms of its MIT license, which gokcesena53 chose for the repository.

More boards in usb-pd-power-supply

Similar boards