Powerstep01-breakout
About the Powerstep01-breakout
Powerstep01-breakout is an open source PCB design by goodrobotics, published on GitHub. It is a 2-layer board measuring 65.3 × 52.8 mm, with 24 components from 15 distinct parts.
Other key parts include the POWERSTEP01. By type, the board carries 14 capacitors, 4 connectors, 4 resistors, 1 IC and 1 diode.
It belongs with the robotics & motion, iot & wireless and dev boards & breakouts designs in this gallery.
From the project
Wi-Fi Stepper project repo
Main components on the Powerstep01-breakout
Powerstep01-breakout bill of materials (BOM)
24 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | POWERSTEP01 powerSTEP01 | powerSTEP01 | U1 |
| 1 | SCREW_TERMINAL_01X06 Screw_Terminal_01x06 | Phoenix_Screw_Terminal-MKDS_1,6-P3.81x06 | J1 |
| 1 | CONN_01X04 Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | CONN_01X07 Conn_01x07 | PinHeader_1x07_P2.54mm_Vertical_SMD_Pin1Left | J3 |
| 1 | CONN_01X10 Conn_01x10 | PinHeader_1x10_P2.54mm_Vertical | J4 |
| 1 | D_SCHOTTKY_X2_SERIAL_AKC D_Schottky_x2_Serial_AKC | SOT-23 | D1 |
| 4 | 220nF 100V | C_0805_2012Metric | C1, C2, C3, C4 |
| 2 | 470nF 100V | C_0805_2012Metric | C5, C10 |
| 1 | 47nF 100V | C_0805_2012Metric | C6 |
| 2 | 68uF 100V | CP_Radial_D16.0mm_P7.50mm | C7, C8 |
| 1 | 0.1UF 0.1uF | C_0603_1608Metric | C9 |
| 2 | 0.1uF 100V | C_0603_1608Metric | C11, C12 |
| 1 | 0.1UF 0.1uF | C_1206_3216Metric | C13 |
| 1 | 22UF 22uF | C_1206_3216Metric | C14 |
| 4 | 0.2 | R_2512_6332Metric | R1, R2, R3, R4 |
Powerstep01-breakout design files
The KiCad project lives in the goodrobotics/wifistepper repository on GitHub; these links point at the commit this page was built from.
Powerstep01-breakout: common questions
How big is the Powerstep01-breakout?
The Powerstep01-breakout measures 65.3 × 52.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Powerstep01-breakout?
24 components, from 15 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Powerstep01-breakout design files?
From the goodrobotics/wifistepper repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Powerstep01-breakout design in my own project?
The repository has no license, so all rights stay with goodrobotics. Use it as a reference, and ask the author before reusing the design.
More boards in wifistepper
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0k
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7k
Eecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2k
88 Pin Vag Breakout
142 × 58 mm91 parts2LGPL-3.01.2k
Breakout 60pin EEC-IV
139.7 × 62.2 mm15 parts2LGPL-3.01.2k
134pin 7-967288-1
139.7 × 73.7 mm38 parts2LGPL-3.01.2k