Buck-Converter-LN5007MM
Gopinath-T-Z·Buck-Converter-LN5007MM
About the Buck-Converter-LN5007MM PCB
Buck-Converter-LN5007MM is an open source PCB design by Gopinath-T-Z, published on GitHub. It is a 2-layer board measuring 45 × 33.5 mm, with 14 components from 13 distinct parts.
Other key parts include the LM5007MM. By type, the board carries 5 capacitors, 4 resistors, 1 IC, 1 diode and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
Regulated DC Buck Converter (12V–75V → 10V, 400mA) using LN5007MM PWM controller. Designed in KiCad EDA
A KiCad-designed DC buck-boost converter using the LN5007MM PWM controller IC.
Main components on the Buck-Converter-LN5007MM
Buck-Converter-LN5007MM bill of materials (BOM)
14 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | LM5007MM | MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | 12V to 75V | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | Vin1 |
| 1 | 10V | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | Vout1 |
| 1 | SS110 | D_SMA | D1 |
| 1 | 100µF | L_10.4x10.4_H4.8 | L1 |
| 1 | 0.1uF | C_0805_2012Metric | C1 |
| 2 | 0.1µF | C_0805_2012Metric | C2, C5 |
| 1 | 10nf | C_0805_2012Metric | C3 |
| 1 | 100µF | C_Elec_6.3x5.4 | C4 |
| 1 | 3kΩ | R_0805_2012Metric | R1 |
| 1 | 200KΩ | R_0805_2012Metric | R2 |
| 1 | 1KΩ | R_0805_2012Metric | R4 |
| 1 | 100KΩ | R_0805_2012Metric | R5 |
Buck-Converter-LN5007MM design files
The KiCad project lives in the Gopinath-T-Z/Buck-Converter-LN5007MM repository on GitHub; these links point at the commit this page was built from.
- LayoutBuck Boost.kicad_pcb
- SchematicBuck Boost.kicad_sch
Buck-Converter-LN5007MM: common questions
How big is the Buck-Converter-LN5007MM PCB?
The Buck-Converter-LN5007MM measures 45 × 33.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Buck-Converter-LN5007MM?
14 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Buck-Converter-LN5007MM design files?
From the Gopinath-T-Z/Buck-Converter-LN5007MM repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Buck-Converter-LN5007MM design in my own project?
The repository has no license, so all rights stay with Gopinath-T-Z. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k