Gpx connector
GPXenergy·gpx_connector·hardware/GPXconn_v2_rev3.kicad_pcb
About the Gpx connector PCB
Gpx connector is an open source ESP32 PCB design by GPXenergy, published on GitHub under the MIT license. It is a 2-layer board measuring 55.8 × 42.5 mm, with 59 components from 44 distinct parts.
Its main chip is the ESP-WROOM-3232D, from the ESP32 family. Other key parts include the TPS563252, OPAMP_5PIN-NCS333A, TLV431 and TESD5V0V4UCX6. By type, the board carries 27 resistors, 11 capacitors, 5 ICs, 3 transistors, 2 diodes and 2 inductors.
It belongs with the iot & wireless designs in this gallery.
From the project
GPXconnector device connecting to dutch smart meter and sending data to the GPX API
The GPX-Connector is part of the GPX system to connect a smart meter to the GPX multi-user system. It runs on an ESP32, which connects to the smart meter through a RJ11 cable and sends the data over wifi to the GPX API.
Check out the firmware directory for the latest firmware, separated by hardware version. You will find the firmware for your specific hardware in its own directory:
Main components on the Gpx connector
Gpx connector bill of materials (BOM)
59 components, 44 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP-WROOM-3232D | ESP32-WROOM-32D | U1 |
| 1 | TPS563252 | SOT-563 | U2 |
| 1 | OPAMP_5PIN-NCS333A | SOT-353_SC-70-5 | U3 |
| 1 | TLV431 | SOT23 | U4 |
| 1 | TESD5V0V4UCX6 | SOT457 | U5 |
| 1 | BJT-NPN-SOT23 | SOT23 | Q1 |
| 1 | MOSFET-PSOT23 | SOT23 | Q2 |
| 1 | 2N7002H | SOT23 | Q3 |
| 1 | RJ11 | AMPHENOL_54601-906WPLF | CONN1 |
| 1 | JACK-3.5MM-3P-SW | CUI_SJ2-35813B-SMT-TR | CONN2 |
| 1 | PINHD_R_1X62.54MM | PinHeader_1x06_P2.54mm_Vertical | CONN3 |
| 1 | Fuse | Fuse_0603_1608Metric | F1 |
| 1 | Lightpipe | lightpipe_panelmount | N2 |
| 1 | 300mOhm 1% | R_0603_1608Metric | RS0 |
| 1 | SW_SPDT | SW-1MS1-T2-B4-M6 | SW1 |
| 1 | USB-C-2.0-16P | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | USB1 |
| 1 | LED-RGB-NOCMN | LED_5050_3535_combined | LED1 |
| 2 | D-SCHOTTKY-SOD323-OL | D_SOD-323 | D1, D3 |
| 1 | 0R | R_0603_1608Metric | FB1 |
| 1 | 2.2µH | L_1008_2520Metric | L1 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0.5F 5.5V | CP_Radial_L17_W8.5_P12 | C1 |
| 2 | 22µ | C_0805_2012Metric | C2, C3 |
| 1 | 33p | C_0603_1608Metric | C4 |
| 3 | 100n | C_0603_1608Metric | C5, C7, C11 |
| 2 | 10µ | C_0603_1608Metric | C6, C9 |
| 1 | 1µ | C_0603_1608Metric | C8 |
| 1 | DNP | C_0603_1608Metric | C10 |
| 1 | 1k2 1% | R_0603_1608Metric | R1 |
| 1 | 51k 1% | R_0603_1608Metric | R2 |
| 5 | 10k | R_0603_1608Metric | R3, R18, R19, R22, R27 |
| 1 | 15k | R_0603_1608Metric | R4 |
| 1 | 47k | R_0603_1608Metric | R5 |
| 4 | 5k1 | R_0603_1608Metric | R6, R20, R24, R25 |
| 1 | 51 | R_0603_1608Metric | R7 |
| 1 | 115k 1% | R_0603_1608Metric | R8 |
| 1 | 25.5k 1% | R_0603_1608Metric | R9 |
| 1 | 47k 1% | R_0603_1608Metric | R10 |
| 1 | 18k 1% | R_0603_1608Metric | R11 |
| 1 | 750 | R_0603_1608Metric | R12 |
| 1 | 510 | R_0603_1608Metric | R13 |
| 1 | 1k6 | R_0603_1608Metric | R14 |
| 2 | 100k | R_0603_1608Metric | R15, R16 |
| 1 | 0R | R_0603_1608Metric | R17 |
| 3 | 100 | R_0603_1608Metric | R21, R23, R26 |
Gpx connector design files
The KiCad project lives in the GPXenergy/gpx_connector repository on GitHub; these links point at the commit this page was built from.
Gpx connector: common questions
What microcontroller does the Gpx connector use?
The Gpx connector is built around the ESP-WROOM-3232D, from the ESP32 family.
How big is the Gpx connector PCB?
The Gpx connector measures 55.8 × 42.5 mm, has 2 copper layers and is 1.579 mm thick.
How many components are on the Gpx connector?
59 components, from 44 distinct parts. The full bill of materials is listed on this page.
Where can I download the Gpx connector design files?
From the GPXenergy/gpx_connector repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Gpx connector design in my own project?
Yes, under the terms of its MIT license, which GPXenergy chose for the repository.
Can I test firmware for the Gpx connector without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k