HardLabs

HACKCLUB-GCBS-MACRO-MACHINE

graysonbooth13-design·HACKCLUB-GCBS-MACRO-MACHINE·PCB + ECT/HACK CLUB.kicad_pcb

HACKCLUB-GCBS-MACRO-MACHINE PCB layout, top view — open source RP2040/RP2350 board by graysonbooth13-design

About the HACKCLUB-GCBS-MACRO-MACHINE PCB

HACKCLUB-GCBS-MACRO-MACHINE is an open source RP2040/RP2350 PCB design by graysonbooth13-design, published on GitHub. It is a 2-layer board measuring 80 × 93.9 mm, with 10 components from 3 distinct parts.

Its main chip is the XIAO-RP2040-DIP, from the RP2040/RP2350 family. By type, the board carries 5 switches, 4 diodes and 1 IC.

It belongs with the keyboards designs in this gallery.

From the project

This is my first GitHub repo so this might not be good but I built this macro pad for the hackclub project

HACK.CLUB.MACRO.BOM.csv# HACKCLUB-GCBS-MACRO-MACHINE This is my first GitHub repo so it is a work in progress but I built this macro pad for the hackclub project If you have any ideas or concerns I am fully open to critisism just leave a comment! :)

GRAYSONS MACRO MACHINE GRAYSONS MACRO MACHINE is a 5 key macropad. It also has 4 SK6812 MINI-E LEDs, and uses QMK firmware

HACKCLUB-GCBS-MACRO-MACHINE, from the project README
From the project README

Main components on the HACKCLUB-GCBS-MACRO-MACHINE

XIAO-RP2040-DIP

HACKCLUB-GCBS-MACRO-MACHINE bill of materials (BOM)

10 components, 3 distinct parts.

QtyPartRefs
1
XIAO-RP2040-DIP
U1
5
SW_Push
SW1, SW2, SW3, SW4, SW5
4
SK6812MINI
D1, D2, D3, D4

HACKCLUB-GCBS-MACRO-MACHINE design files

The KiCad project lives in the graysonbooth13-design/HACKCLUB-GCBS-MACRO-MACHINE repository on GitHub; these links point at the commit this page was built from.

HACKCLUB-GCBS-MACRO-MACHINE: common questions

What microcontroller does the HACKCLUB-GCBS-MACRO-MACHINE use?

The HACKCLUB-GCBS-MACRO-MACHINE is built around the XIAO-RP2040-DIP, from the RP2040/RP2350 family.

How big is the HACKCLUB-GCBS-MACRO-MACHINE PCB?

The HACKCLUB-GCBS-MACRO-MACHINE measures 80 × 93.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HACKCLUB-GCBS-MACRO-MACHINE?

10 components, from 3 distinct parts. The full bill of materials is listed on this page.

Where can I download the HACKCLUB-GCBS-MACRO-MACHINE design files?

From the graysonbooth13-design/HACKCLUB-GCBS-MACRO-MACHINE repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the HACKCLUB-GCBS-MACRO-MACHINE design in my own project?

The repository has no license, so all rights stay with graysonbooth13-design. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HACKCLUB-GCBS-MACRO-MACHINE without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

Similar boards