HardLabs

KoalaByte-Zero

greatwhitek9-lab·KoalaByte-Zero·device build schematics/KiCad/KoalaByte_Rev0_5_VersionB.kicad_pcb

KoalaByte-Zero PCB layout, top view — open source board by greatwhitek9-lab
Simulate this board

About the KoalaByte-Zero PCB

KoalaByte-Zero is an open source PCB design by greatwhitek9-lab, published on GitHub. It is a 2-layer board measuring 120 × 85 mm, with 1 components from 1 distinct parts.

Other key parts include the Main AI/compute board.

It belongs with the audio, dev boards & breakouts and rf & radio designs in this gallery.

From the project

Ethical Pentesting Device with Gruff Cyberpunk AI Companion

This folder contains the normalized Koalabyte Zero Rev0.5 Version B prototype production starter package.

Applied mismatch fixes and voice hardware updates:

1. Display normalized to DS1 3.5 inch HDMI touchscreen, 800x480, 5V. 2. Camera normalized to CAM1 IMX708 CSI camera module centered just above the eyes and below the enlarged ears. 3. Power upgraded to REG1 5V 12A main rail with 10A-class protection. 4. SWPWR normalized as a valid rear/back-mounted power switch, not a malformed BOM/PnP row. 5. HUB1 retained as the powered internal USB 3.0 hub for SDR, Wi-Fi, debug, and USB touch. 6.…

Main components on the KoalaByte-Zero

Main AI/compute board

KoalaByte-Zero bill of materials (BOM)

1 components, 1 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
Main AI/compute board
A1

KoalaByte-Zero design files

The KiCad project lives in the greatwhitek9-lab/KoalaByte-Zero repository on GitHub; these links point at the commit this page was built from.

KoalaByte-Zero: common questions

How big is the KoalaByte-Zero PCB?

The KoalaByte-Zero measures 120 × 85 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the KoalaByte-Zero?

1 components, from 1 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the KoalaByte-Zero design files?

From the greatwhitek9-lab/KoalaByte-Zero repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the KoalaByte-Zero design in my own project?

The repository has no license, so all rights stay with greatwhitek9-lab. Use it as a reference, and ask the author before reusing the design.

Similar boards