HardLabs

Gioia isp 1

Green-bms·gioia·Gioia isp (for programming)/Kicad files/gioia_isp_1.kicad_pcb

Gioia isp 1 PCB layout, top view — open source ESP8266 board by Green-bms

About the Gioia isp 1 PCB

Gioia isp 1 is an open source ESP8266 PCB design by Green-bms, published on GitHub. It is a 2-layer board measuring 26 × 22 mm, with 5 components from 5 distinct parts.

Its main chip is the WeMos_D1_mini, from the ESP8266 family. By type, the board carries 2 connectors, 1 IC, 1 diode and 1 resistor.

It belongs with the wearables and power & battery designs in this gallery.

From the project

Electronic wearable device

Youtube: https://youtu.be/MnyeiMZdmjQ?si=YpLxnYz4cA8ocs8j Instructables: https://www.instructables.com/Gioia-Glittering-Fashion/ Hackaday.io: https://hackaday.io/project/202226-gioia-glittering-fashion Hackster.io: https://www.hackster.io/green-bms/gioia-glittering-fashion-81f5f8 Purchase PCB here: https://www.pcbway.com/project/shareproject/Gioiaglitteringfashion21monocromeledscaeb9192.html https://www.pcbway.com/project/shareproject/Gioiaglitteringfashion8RGBledsabd15673.html

Gioia isp 1, from the project README
From the project README

Main components on the Gioia isp 1

WeMos_D1_mini

Gioia isp 1 bill of materials (BOM)

5 components, 5 distinct parts.

QtyPartRefs
1
WeMos_D1_mini
U1
1
Conn_01x04
J1
1
USB_B_Micro
J2
1
LED
D1
1
330
R1

Gioia isp 1 design files

The KiCad project lives in the Green-bms/gioia repository on GitHub; these links point at the commit this page was built from.

Gioia isp 1: common questions

What microcontroller does the Gioia isp 1 use?

The Gioia isp 1 is built around the WeMos_D1_mini, from the ESP8266 family.

How big is the Gioia isp 1 PCB?

The Gioia isp 1 measures 26 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Gioia isp 1?

5 components, from 5 distinct parts. The full bill of materials is listed on this page.

Where can I download the Gioia isp 1 design files?

From the Green-bms/gioia repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Gioia isp 1 design in my own project?

The repository has no license, so all rights stay with Green-bms. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Gioia isp 1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.

More boards in gioia

Similar boards