Syzygy txr4-usb3
gregdavill·syzygy-txr4-usb3·r1p0/kicad-src/syzygy-txr4-usb3.kicad_pcb
About the Syzygy txr4-usb3 PCB
Syzygy txr4-usb3 is an open source RISC-V PCB design by gregdavill, published on GitHub. It is a 4-layer board measuring 50 × 50 mm, with 27 components from 16 distinct parts.
Its main chip is the CH32V003F4U6, from the RISC-V family. Other key parts include the FUSB302BMPX. By type, the board carries 10 resistors, 9 capacitors, 5 connectors, 2 ICs and 1 crystal.
From the project
SYZYGY is an FPGA expansion standard for medium to high speed interfaces. Learn more and check out the specifications here: https://syzygyfpga.io/
SYZYGY is an FPGA expansion standard for medium to high speed interfaces. Learn more and check out the specifications here: https://syzygyfpga.io/
A breakout to connect SYZYGYs 5Gbit serdes lanes through to a USB-C connector
Running the gateware luna stack on the FPGA can enumerate as a USB3 device.

Main components on the Syzygy txr4-usb3
Syzygy txr4-usb3 bill of materials (BOM)
27 components, 16 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | FUSB302BMPX | WQFN-14-1EP_2.5x2.5mm_P0.5mm_EP1.45x1.45mm | U2 |
| 1 | CH32V003F4U6 | QFN-20-1EP_3x3mm_P0.4mm_EP1.65x1.65mm_ThermalVias | U3 |
| 1 | SG3225VEN 125.000000M-CJGA3 SG3225 | Oscillator_SMD_Silicon_Labs_LGA-6_2.5x3.2mm_P1.25mm | X1 |
| 1 | QTH-020-01-F-D-DP-A-K SYZYGY-TXR-4 | SYZYGY-TXR-POD | J1 |
| 1 | DW254W-22-12-85 PMOD I/O | PinSocket_2x06_P2.54mm_Horizontal | J3 |
| 1 | 12401610E4#2A USB_C_Receptacle | USB_C_Receptacle_Amphenol_12401610E4-2A | J4 |
| 1 | DZ254R-11-02-63 PH_01x02 | PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | DZ254R-11-02-63 5V AUX | PinHeader_2x01_P2.54mm_Vertical | J6 |
| 8 | CL05B104KA5NNNC 0.1uF | C_0402_1005Metric | C1, C4, C5, C7, C8, C9, C10, C32 |
| 1 | DNP | C_0603_1608Metric | C2 |
| 2 | YC124-JR-0733RL 33R | R_Array_Convex_4x0402 | R1, R9 |
| 3 | RC0402FR-072K2L 2k2 | R_0402_1005Metric | R2, R3, R4 |
| 2 | RC0402FR-075K1L 5k1 | R_0402_1005Metric | R5, R6 |
| 1 | RC0402FR-0710KL 10k | C_0402_1005Metric | R7 |
| 1 | RC0402FR-074K7L 4.7k | C_0402_1005Metric | R8 |
| 1 | AC0402FR-07100RL 100R | R_0402_1005Metric | R16 |
Syzygy txr4-usb3 design files
The KiCad project lives in the gregdavill/syzygy-txr4-usb3 repository on GitHub; these links point at the commit this page was built from.
Syzygy txr4-usb3: common questions
What microcontroller does the Syzygy txr4-usb3 use?
The Syzygy txr4-usb3 is built around the CH32V003F4U6, from the RISC-V family.
How big is the Syzygy txr4-usb3 PCB?
The Syzygy txr4-usb3 measures 50 × 50 mm, has 4 copper layers and is 1.4 mm thick.
How many components are on the Syzygy txr4-usb3?
27 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Syzygy txr4-usb3 design files?
From the gregdavill/syzygy-txr4-usb3 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Syzygy txr4-usb3 design in my own project?
The repository has no license, so all rights stay with gregdavill. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Syzygy txr4-usb3 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105