Timepix RSS

Grim-Raid·Timepix_RSS_Schematic

Timepix RSS PCB layout, top view — open source Raspberry Pi board by Grim-Raid

About the Timepix RSS PCB

Timepix RSS is an open source Raspberry Pi PCB design by Grim-Raid, published on GitHub. It is a 4-layer board measuring 54 × 92.8 mm, with 83 components from 39 distinct parts.

Its main chip is the Hirose DF40C-100DS-0.4V, from the Raspberry Pi family. Other key parts include the TI TPS259470ARPWR, TPS2553DBVR, Microchip USB2422-I/MJ and TI TPS2052BDR. By type, the board carries 34 capacitors, 28 resistors, 9 connectors, 5 diodes, 4 ICs and 1 transistor.

Main components on the Timepix RSS

Timepix RSS bill of materials (BOM)

83 components, 39 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TI TPS259470ARPWR
TPS259470ARPW
U1
1
TI TPS2553DBVR (alt TPS2553DDBVR, precision ILIM, deeper stock)
TPS2553DBVR
U2
1
Microchip USB2422-I/MJ
USB2422-I/MJ
U3
1
TI TPS2052BDR
TPS2052B
U4
1
Vishay SiA441DJ-T1-GE3
SiA441DJ
Q1
1
ECS ECS-240-18-33-AGN-TR (CL=18pF, -40..85C)
24MHz
Y1
1
Hirose DF40C-100DS-0.4V
CM4 DF40 (pins 1-100)
J2
1
Hirose DF40C-100DS-0.4V
CM4 DF40 (pins 101-200)
J3
1
Hirose DF14A-4P-1.25H(52) (gold; harness: DF14-4S-1.25C(10) + DF14-2628SCFA crimps)
USB Port 1 (Timepix A)
J4
1
Hirose DF14A-4P-1.25H(52) (gold; harness: DF14-4S-1.25C(10) + DF14-2628SCFA crimps)
USB Port 2 (Timepix B)
J5
1
GCT USB4105-GF-A
USB-C service (DNP)
J6
1
Samtec TSW-102-07-G-S
nRPIBOOT jumper
J7
1
Samtec TSW-103-07-G-S
Debug UART (GPIO14/15)
J8
1
Samtec TSW-104-07-G-S
I2C0 expansion (SDA0/SCL0)
J9
1
Samtec TSW-102-07-G-S
CM4 reset
J10
1
Pulse HX1188NLT
HX1188NL
T1
1
Littelfuse SMBJ5.0A
SMBJ5.0A
D1
2
TI TPD2E009DBZR
TPD2E009
D2, D3
1
Lite-On LTST-C190GKT
PWR green
D4
1
Lite-On LTST-C190YKT
ACT yellow
D5
Show 19 more
QtyPartRefs
2
KEMET T543B107M010AHW150 (polymer Ta; alt T520B107M010ATE070)
100uF
C1, C2
7
Samsung CL32B226KOJNNNE
22uF
C3, C6, C8, C24, C25, C27, C28
14
KEMET C0603C104K5RACTU (X7R 50V)
100nF
C4, C7, C9, C10, C11, C13, C16, C18 +6
1
KEMET C0603C103K5RACTU (X7R 50V)
10nF
C5
2
KEMET C0603C105K8RACTU (X7R 10V)
1uF
C12, C17
2
KEMET C0603C270J5GACTU (C0G 50V)
27pF
C14, C15
3
TDK C2012X7R1A106K125AC
10uF
C19, C20, C22
1
Vishay VPDD202W102K1GV001E (2kV X7R 1206)
1nF 2kV
C32
2
KEMET C0603C102K5RACTU (X7R 50V)
1nF
C33, C34
9
Panasonic ERJ-3EKF1003V
100k
R1, R2, R5, R6, R7, R11, R12, R13 +1
1
Panasonic ERJ-3EKF2002V
20k
R3
1
Panasonic ERJ-3EKF9530V
953R 1%
R4
3
Panasonic ERJ-3EKF1002V
10k
R8, R15, R16
3
Yageo RC0603FR-071KL
1k
R9, R27, R28
1
Panasonic ERJ-3EKF1202V
12k 1%
R10
6
Panasonic ERJ-3EKF75R0V
75R
R17, R18, R19, R20, R21, R22
1
Panasonic ERJ-3EKF1004V
1M
R23
2
Panasonic ERJ-3EKF5101V
5.1k
R24, R25
1
Panasonic ERJ-3EKF2200V
220R
R26

Timepix RSS design files

The KiCad project lives in the Grim-Raid/Timepix_RSS_Schematic repository on GitHub; these links point at the commit this page was built from.

Timepix RSS: common questions

What microcontroller does the Timepix RSS use?

The Timepix RSS is built around the Hirose DF40C-100DS-0.4V, from the Raspberry Pi family.

How big is the Timepix RSS PCB?

The Timepix RSS measures 54 × 92.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Timepix RSS?

83 components, from 39 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Timepix RSS design files?

From the Grim-Raid/Timepix_RSS_Schematic repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Timepix RSS design in my own project?

The repository has no license, so all rights stay with Grim-Raid. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Timepix RSS without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Raspberry Pi firmware against it before you order a PCB.

Similar boards