HardLabs

KiCad-Template

groutoutlook·KiCad-Template

KiCad-Template PCB layout, top view — open source ESP32 board by groutoutlook

About the KiCad-Template PCB

KiCad-Template is an open source ESP32 PCB design by groutoutlook, published on GitHub. It is a 4-layer board measuring 48.1 × 23.8 mm, with 1 components from 1 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family.

From the project

KiCad-Template description

KiCad project template with DRC rules optimized for JLCPCB/PCBWAY fabrication. and CLI-friendly / bleeding edge people.

- Design Rule Constraints: Compatible with JLCPCB/PCBWAY low-cost fabrication - DRC Rules: Pre-configured .kicaddru file for JLCPCB/PCBWAY compliance - Jobset Outputs: Automated generation of PDFs, 3D models, renders, and BOMs - Footprint Importer: Easy import of symbols, footprints, and 3D models - Minimalistic Drawing Sheet**: Clean, simple template with essential information only

Main components on the KiCad-Template

ESP32-S3-WROOM-1

KiCad-Template bill of materials (BOM)

1 components, 1 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1
U1

KiCad-Template design files

The KiCad project lives in the groutoutlook/KiCad-Template repository on GitHub; these links point at the commit this page was built from.

KiCad-Template: common questions

What microcontroller does the KiCad-Template use?

The KiCad-Template is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the KiCad-Template PCB?

The KiCad-Template measures 48.1 × 23.8 mm, has 4 copper layers and is 1.6062 mm thick.

How many components are on the KiCad-Template?

1 components, from 1 distinct parts. The full bill of materials is listed on this page.

Where can I download the KiCad-Template design files?

From the groutoutlook/KiCad-Template repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the KiCad-Template design in my own project?

The repository has no license, so all rights stay with groutoutlook. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the KiCad-Template without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards